Specifications
SATV/CATV
Section 14
14
287
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
287
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
NET 30
Terms
Four-Way
Couplers
•For indoor and outdoor use
•RF shielding exceeds FCC
specifications •Maintains 75ohm
impedance on trunk •Full
5MHz~900MHz operational
range •Use 75ohm terminator on
last trunk output (MCM #33-550)
Order # Description (1-9) (10-49) (50-up)
33-1425 16dB $6.25 $5.92 $5.40
33-1430 20dB 6.25 5.92 5.40
33-1435 24dB 6.25 5.92 5.40
75ohm In–Line
•6dB attenuation
•5~900MHz frequency.
Order # (1-9) (10-49) (50-up)
33-560 $2.79 $2.37 $2.24
Fixed Mini-Types
•Nickel plated solid
brass body •Monolithic
ceramic printed circuit
board, ensuring rugged
construction •5%
accuracy •22 gauge
steel center pin •Small: 1
3
⁄
8" size •
“
F” type female to
male •75ohm •Three attenuators to choose from
•Sorry–no mixing of values for quantity pricing.
Order # dB (1-9) (10-49) (50-up)
33-790 3 $3.09 $2.68 $1.77
33-795 6 3.19 2.77 1.84
33-810 12 3.19 2.78 1.84
Fixed Mini-Type Attenuator Pads
Features: Nickel-plated,
solid brass body, monolithic
ceramic printed circuit
board, ensuring rugged
construction, etched
glaze-type resistors provide
±5% accuracy and excellent
return loss, small 1.375"
size, 22-gauge spring steel center pin, female
to male fitting, not DC passive. Specifications:
•Bandwidth: 100KHz~1750MHz •Return loss:
20dB typical •Accuracy: ±5%
Order # Description (1-9) (10-up)
33-2750 3dB $1.30 $1.03
33-2755 6dB 1.30 1.03
33-2760 8dB 1.30 1.03
33-2765 10dB 1.30 1.03
33-2770 12dB 1.30 1.03
33-2775 16dB 1.30 1.03
33-2780 20dB 1.30 1.03
LNB Stacking Convertors
Stacking convertors are
designed to allow two LNB
signals to share the same
coax. This allows you to
have all programming
(110° and 119°) at the receiver without running
additional cables. Down–converts the signal at
the receiver (not necessary with Sony
wide–band receivers).
Order # Description (1-9) (10-up)
33-7135 Down–convertor $89.95 $79.95
Ground Clamps
A properly grounded antenna or satellite system
will not suffer from the effects of ground loops.
These ground loops can be identified as beat and
hairingbone in the picture. Available in
3
⁄8" and
5
⁄8" for
connecting to ground rods and two piece clamps for
connecting to
1
⁄2" to 1" water pipes.
Fig. Order # Diameter (1-9) (10-up)
A 33-6895
3
⁄8" $1.79 $1.25
B 33-6900
5
⁄8" 2.09 1.64
C 33-6905
1
⁄2"~1" 2.89 2.46
A
B
C
High Frequency
Ground Blocks
High frequency
ground blocks have
extended frequency capacity to 2.4GHz making them
perfect for satellite and digital applications. Nickel
plated finish to resist effects of the weather.
Order # Description (1-9) (10-99) (100-up)
33-7705 Single $1.35 $1.27 $1.16
33-7710 Dual 2.07 2.03 1.93
Grounding Block
•Zinc die-cast •Mounting
screws included.
Order # Description (ea.)
33-470 Single $0.82
33-1800 Dual 2.69
Snap-N-Seal
Ground Blocks
These Snap-N-Seal ground
blocks are the perfect way
to make your ground with
less chance of allowing
moisture to get into the
connection. The unique
design incorporates the Snap-N-Seal feature on the
ground block.
Order # Cable type (1-9) (10-49) (50-up)
33-4175 RG-6 $6.14 $5.63 $5.11
33-4180 RG-6QS 6.14 5.63 5.11
Split Bolts
Quickly and securely connects
ground wires together.
Connect the ground for an
antenna or DSS to the house
ground. Available in two sizes.
Order # Dimensions (1-9) (10-49)
33-7020
1
⁄2" x 1
1
⁄4" $2.89 $2.67
33-7025
3
⁄8" x 1" 1.89 1.74
Double Galvanic
Lightning Arrester
Protects your valuable
video equipment
from voltage surges
caused by lightning
strikes to or near
antennas or cable
television lines.
Frequency range: 5MHz~1GHz.
Order # (1-9) (10-up)
33-8695 $5.19 $4.81
4' x
3
⁄8" Universal Grounding Rod
The 4' universal grounding rod is ideal for
completing your system installation. The copper
coated steal construction prevents ground
loop problems.
Order# (1-9)
33-9700 $5.49
Copper
Grounding Straps
•Used for grounding of electronic equipment to cold
water pipes, etc.
Fig. Order # Size (1-9) (10-up)
A 33-1535 6" $1.00 $0.72
B 33-1540 12" 1.32 1.04
A
B
High Frequency
Attenuators
General purpose wide band
in–line attenuators to prevent excess signal
overloading of an amplifier or receiver. For ease of
installation one end is male the opposite is female.
Units are power passive. Bandwidth: 40~2150MHz.
Order # Mfr. # Description (ea.)
33-9565 2803IFD 3dB $6.31
33-9570 2806IFD 6dB 6.31
33-9575 2810IFD 10dB 6.31
Diplexers
T2 passives provide RF,
IF and satellite radio
distribution in any installation.
They feature a sealed, weatherproof, all-aluminum
housing with “F” connectors spaced farther apart and
placed more forward for easier hand tightening.
They also feature DC passing on all ports to make
them compatible with amplified antennas and
coaxial IR systems.
Fig. Order# Mfr. # Description (1-9) (10-up)
A 33-10215 DP1 Diplexer $19.95 $16.96
B 33-10220 DP2 Wallplate diplexer 19.95 16.96
A
B
DISHNetwork
Block Switch
Use with next
generation DBS dishes
for DISHNetwork and
DirecTV to switch between
programming on two
LNBs. Controlled by the
DISHNetwork receiver.
Order # (1-4)
33-6915 $30.29
Ground Wire
Type THHN wire commonly used as ground wire.
10AWG stranded or solid copper with oil and gas
resistant coating. Available in stranded and solid.
Order # Description (ea.) (2-up)
24-5365 Stranded, 500' spool $129.94 -
24-5370 Solid, 500' spool 129.94 $107.06
24-5375 Solid, sold per foot 1.11 0.88
C51 pg 287 7/31/06 10:21 AM Page 287