Specifications

SATV/CATV
Section 14
292
Order Online
www.mcminone.com
NET 30
Terms
14
Satellite Meter
Use for easy
installation of
satellite receiver
dishes. The satellite meter operates on the power from
the receiver to LNB. Easy to read digital LCD display
with full text graphics menu and built-in audio tone to
aid in installation. Connect to single, dual or Phase III
LNBF, DishPro, or quad. Coax jumper cable not
included (MCM #32-580).
Order # (ea.)
33-10035 $119.00
AcuTrac
®
Digital
Satellite Signal
Level Meter
The AcuTrak
allows an installer to easily align a multi–feed system
by displaying LNB A and LNB B signal strength
measurement levels simultaneously. The AcuTrak
features include: LCD display, selectable audio
on-off tone, receiver voltage output, individual LNB
current consumption, 22KHz tone and coax cable test.
AcuTrakplus includes: Rechargable battery pack,
leather case and AC/DC chargers.
Order # Mfr. # (ea.)
33-7390 Acutrac $149.00
33-7395 Acutracplus 189.00
Sat-Finder
Satellite Meter
The Sat-Finder makes it
easy to find maximum
satellite signal. Simply
connect between the
satellite receiver and the LNB to precisely align
the dish in seconds. The Sat-Finder has a faster
response time than the receiver’s signal strength
meter for more precise adjustments.
Order # (1-9) (10-49) (50-up)
33-7725 $24.95 $24.50 $23.75
Satellite Finder Kit
The satellite finder kit makes aligning a dish simple
and easy. The satellite finder attaches to the output of
the LNB or LNA and supplies power to the LNB/LNA
via the battery holder, or hook the finder in-line with
the receiver. Works with C or K band satellites and
DSS/DBS. Specifications: Frequency range:
950~1550MHz, power supply: 12~18VDC, 60mA,
input sensitivity: 62~80dB, impedance: 75ohm. Kit
includes: •Satellite finder, compass, RF jumper
cable and battery holder all in a vinyl carry case
•Use #27-1335 battery pack for DSS applications
Order # (kit)
33-1975 $49.99
Portable Satellite Meter
Features: •Signal strength peaking meter with level
control •Audible peak indicator •Built-in LNB power
source •LNB voltage and current measurement
•Horizontal and vertical LED polarity indicator and
voltage selection •Built-in Ni-Cad battery •Battery
test mode •Antenna and receiver “F” type connectors
•Includes carrying case with shoulder strap, swing
down bail, AC power adaptor and owner’s manual
Specifications
Frequency range 900MHz~2050MHz
Input impedance 75Ω
Detection range: -60~-10dBm
DC voltage: 0~25V
DC current: 0~500mA
Dimensions/weight 5" (L) x 2
1
⁄
2" (H) x 6" (D)/1 lb.
Order # (ea.)
72-6281 $129.00
®®
Satlook
Spectrum Analyzer
Perfect 10 Satlook is a
measuring instrument
developed for exact
alignment and
adjustment of satellite
dishes. The instrument
features a 4
1
⁄2" B/W
monitor which either shows normal TV channel or
the frequency spectrum 950~2150MHz. Detection of
satellite signals is made easy. Spectrum mode and
the spectrum can be expanded for correct adjustment
of the polarization. Switching between spectrum/TV
mode is made easy by the push of a button. LNB
polarization is switchable, 13V/18V and indicated by
an LED. The instrument is short circuit protected
when connecting the LNB. Power is supplied by a
built–in rechargeable battery and is recharged
from the external battery charger or the car
adaptor. Charging of the battery is supervised by a
microprocessor which senses when the charging of
the battery is maximized. Charging is indicated with
“CH” on the two digit LED display.
Order # (ea.)
33-3255 $823.00
Suunto Tandem
Inclinometer/Compass
The Suunto Tandem is two precision
satellite tools in one. Slope/height
(inclinometer) measurements are
easily done through the sight to alert
you to possible obstructions. Accurate
satellite bearings can be found with
the liquid filled precision compass.
Mfr. #PVCOMAF.
Order # (ea.)
33-7420 $199.00
Compass
Economical compass for easily identifying
satellite positions. Small size fits in
the palm of your hand. Top
closes to protect surface
from scratches.
Specifications:
•Directional accuracy: ±5° •Direction indication:
2°/scale •Dimensions: 72mm x 55mm x 30mm
Order # (ea.) (2-10) (11-up)
33-2050 $5.34 $4.87 $3.81
Satellite Dish Level
Attaches to the dish support to
quickly tell if the dish is plumb
and level. Mfr. #PVLEV1.
Order # (ea.)
33-7425 $2.99
YEAR LIMITED
1 WARRANTY
Antenna Rotator with
Memory and Remote Control
The remote controlled antenna rotator with 12
position memory is ideally suited for use in today’s
home theater systems. Micro–processor control
allows for up to 12 memory positions to be stored.
Dual display shows both direction and memory
position. Uses standard three conductor rotator
wire (#24-3080).
Order # (ea.)
30-1101 $79.95
Antenna Rotator
•Heavy-duty motor
handles large antennas
•Extra strong machine
cut gears won’t bind
•Brake pads hold firm
•Tested to 70 mph
winds •Requires
three–wire rotator wire (#24-3080)
Order # (ea.)
30-1020 $74.95
Economical
Antenna
Rotator
Our economical
antenna rotator
helps improve
TV and FM reception. Two piece connects via three
wire rotator cable. Adjustable clamp accommodates
mast up to 1
1
⁄2"
Order # (ea.)
30-1100 $39.95
C51 pg 292 7/31/06 11:29 AM Page 292