Specifications

SATV/CATV
Section 14
14
277
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
277
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
NET 30
Terms
S–Video Modulator
The new SVM series of modulators offers complete
MTS stereo encoding and S-video inputs in a full
component size rack mountable case. The SVM-22
and SVM-24 are two and four channel stereo
modulators with 25dBmV of output and easy push
button programming. The SVM series incorporates
S–video inputs that support both S–video and
composite video feeds with included adaptors.
Offering full MTS stereo with dbx noise reduction
and Dolby Pro Logic
®
compatibility makes the SVMs
perfect for integration into any home theater
system. The SVM series offers integrated IR control.
Each modulator has IR emitter output jacks and is
compatible with both 12 volt and 5 volt IR systems.
The SVMs, with their new desktop power supplies,
can remotely power a DA-550 or DA-8200 series
distribution panel from up to 75' away.
Order # Outputs (ea.)
SVM-22 Dual $215.90
SVM-24 Quad 323.80
Digital RF
Modulators
The 5515, 5525 and 5545 are one, two and four
channel input modulators with loop–out capabilities
and integrated IR control. Each offers IR emitter
output jacks and the ability to remotely power a
DA-550 series or an DA-8200 series distribution
panel from up to 75' away. The 5500 series works
with both the 12 volt and 5 volt IR systems and
accessories. The 5515, 5525 and 5545 offer 75ohm
termination jumpers on all channels to loop–through
the video and audio signals. Features include: 1, 2
and 4 channels, push button programming, UHF
14~64 and CATV 65~125, 25dBmV output.
Order # Outputs (ea.)
5515 1 $72.00
5525-01 2 117.70
5545-01 4 187.55
Stereo
Convertor
Convert
virtually any
make of mono
modulator to
stereo. 5601 goes between the audio source and the
current modulator. Features: 20dB of separation,
dbx noise reduction, Dolby Pro Logic compatible.
Order # (1-4)
5601-01 $170.00
MD-1 Adjacent Channel
Rack Mount Modulator
•Adjacent channel operation uses only one 6MHz
channel slot to create a local channel •S-video
compatible enables connection to high-quality video
components •Adjustable high-power output easily
tune the modulated channel to balance with the rest
of the system (40dBmv) Specifications: •Input
levels: S-video 0.4V~2.7V p-p adjustable, audio:
100mV RMS~3V RMS adjustable •Video
performance: differential gain less than 5% (0.5dB),
Differential phase less than 5° •RF output: Channel
range TV 2~78, STD 2~135, HRC 2~135, IRC 2~135
•Output level range 25~40dBmV adjustable
•IM distortion -60dBC •BTSC audio performance
•Frequency range 20Hz~20KHz +/- 1dB
•SNR greater than 60dB •All channel ranges
exclude channels 95~99
Order # Mfr. # (1-9) (10-up)
33-10165 MD1 $779.00 $662.00
MD-4 Quad Channel
Rack Mount Modulator
•Quad channel operation can easily modulate four
signals from one piece •S-video compatible enables
connection to high-quality video components
•Adjustable high-power output easily tune the
modulated channel to balance with the rest of the
system (35dBmv) Specifications: •Input levels:
S-video 0.8V~2.7V p-p adjustable @ 75, audio: 1V p-p
with +/- 25KHz deviation •Video performance:
differential gain less than 5% (0.5dB), differential
phase less than 5° •RF output: Channel range
TV14~78, STD 65~135, HRC 65~135, IRC 65~135
•Output level range 25~35dBmV adjustable
•IM distortion -60dB •All channel ranges
exclude channels 95~99
Order # Mfr. # (1-9) (10-up)
33-10170 MD4 $389.00 $330.65
Four Output RF Modulator
and Video Switcher
Converts up to four audio/video source inputs (DVD,
PVR, VCR, camcorders, video game systems, etc.)
to VHF for viewing on any TV. Switchable between
video sources and cable or antenna. Stereo A/V
and selectable to channel 3 or 4 output. Front panel
instant push button switching. Eliminates the need
for extra monitors. Separate VHF antenna/cable input
simplifies installation and switching of components.
UL listed, FCC approved.
Order # Mfr. # (ea.)
33-9640 MOD-41 $21.95
RF Modulator
The Terk RF
modulator allows video components such as DVD
players, video games, VCRs and camcorders to be
viewed on televisions that are not equipped with an
available A/V jack. Selectable channel 3 or 4 output,
the modulator automatically switches to the video
source when a signal is detected. Terk’s RF
modulator is the ideal way to connect multiple
components to any television. Mfr. #MOD-34.
Order # (ea.)
30-1595 $17.95
RF Modulator
The VS4 MOD+ makes it easy makes it
easy to connect up to four video components to your
television. This modulator and switcher in one
combines extensive functionality with superior
quality. The VS4 MOD+ lets you connect up to four
components to a single TV input with the flexibility to
switch between antenna/cable and video sources. The
TERK VS4 MOD+ lets you get the most out of your
home TV. It easy converts up to four A/V sources to
VHF for viewing. It also lets you select and power
your A/V source using your existing remote control
using the VS4 MOD+ learning remote functionality. In
addition the VS4 was designed using S-video jacks to
ensure that you’ll always receive the clearest
picture possible.
Order # Mfr. # (ea.)
33-9650 VS4-MOD+ $27.95
MINI RF
Modulator
The TERK MINI modulator is a
compact, inexpensive modulator
that will convert any video
source to VHF for viewing on
your TV on either channel 3 or 4.
Its low signal loss enables it to
deliver excellent picture and
sound quality. The MINI allows
you to connect additional A/V
components, such as a DVD
player or a gaming system, to your TV when there are
no available RCA jacks. It is the optimum modulator
for anyone looking to extend the functionality of any
TV without sacrificing space, price or ease of
installation. Most common A/V devices are gaming
systems and DVD players that take up space around
your TV. It features automatic signal detection and
automatically switches between A/V sources when a
signal is detected.
Order # Mfr. # (ea.)
33-9645 MINI $13.95
Designed for high-end, rack-mount installations and structured cable enclosures, the T2 modulator line
provides the ultimate solution for the custom installer. All T2 modulators come with S-video inputs and a
unique feature that provides a contact closure upon the detection of video at the input. Whether enclosure
mounted or rack mounted, these products are designed to complement the high-end systems they support
in both performance and aesthetics.
MD-EM1 Single Channel Modulator
•Adjustable high-power output •Easily tune the modulated channel
to balance with the rest of the system (30dBmv) •Enclosure mount comes with
patented T2 locking system that allows for mounting in all leading structured cable
enclosures •Adjustable video modulation level input ensuring compatibility with all
source equipment Specifications: •Input levels: S-video 0.8V~2.7V p-p adjustable
@ 75, audio: 1V p-p for +/- 25% deviation •Video performance: Differential gain less
than 5% (0.5dB), differential phase less than 5° •RF output: Channel range TV
14~78, STD 65~135, HRC 65~135, IRC 65~135 •Output level range 25~35dBmV
typical •IM distortion -60dB •BTSC audio performance •Frequency range
20Hz~20KHz +/-1dB •SNR greater than 60dB •All channel ranges
exclude channels 95~99
Order # Mfr. # (1-9) (10-up)
33-10175 MDEM1 $219.00 $186.15
Modulators
C51 pg 277 7/31/06 10:07 AM Page 277