Specifications
linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
16 RF Distribution Amplifiers
DA-550BID Bi-Directional RF Distribution
Amplifier with 12-Volt IR
ORDER # t DA-550BID
The Model DA-550BID Bi-directional RF Distribution Amplifier
with 12-volt IR is the heart of a multi-room distribution system
with outputs to eight televisions with coax runs up to 150 feet.
The Model DA-550BID has three inputs, one from CATV and two
from Linear 5400, 5500, or SVM series modulators. The Model
DA-550BID can handle an extremely wide range of input signals
from NTSC and digital TV. The Model DA-550BID offers a 5–42
MHz bandwidth return path for bi-directional communication for
use with digital cable interactive set-top boxes. The Model DA-550BID
can be powered locally with its included power supply or remotely
from up to 75 feet away by using an in-wall power injector wall
plate Model 2010 or any 5500 series or SVM series modulator.
The Model DA-550BID offers optional IR control of connected video
sources and whole-house IR integration with a built-in 12-volt IR
engine. Adding a Model 2100A Wall Plate and a 12-volt IR target to
the coax run of any room allows IR signals to be routed to either a
Model 2010 Wall Plate, 5500 series, or SVM series modulator.
Features:
54 MHz to 1 GHz forward bandwidtht
5 MHz to 42 MHz reverse bandwidtht
3 dB nominal gain on TV outputst
Maximum input level 20 dBmvt
Can be used in locations without electrical access and powered t
remotely with a Linear modulator or the Model 2010 Wall Plate
6.5” W x 1.25” H x 4.5” Dt
DA-550HHR High-Headroom RF Distribution
Amplifier with 12-Volt IR
ORDER # t DA-550HHR
The Model DA-550HHR High-headroom RF Distribution Amplifier with
12-volt IR is the heart of a multi-room distribution system with outputs to
eight televisions with coax runs up to 150 feet. The Model DA-550HHR
has three inputs, one from an off-air antenna or CATV and two from
Linear 5400, 5500, or SVM series modulators. The DA-550HHR
is used with antenna applications for off-air digital and NTSC signals.
The Model DA-550HHR can be powered locally with its included
power supply or remotely from up to 75 feet away by using an
in-wall power injector wall plate Model 2010 or any 5500 series
or SVM series modulator. The Model DA-550HHR offers optional
IR control of connected video sources and whole-house IR integration
with a built-in 12-volt IR engine. Adding a Model 2100A Wall Plate
and a 12-volt IR target to the coax run of any room allows IR
signals to be routed to either a Model 2010 Wall Plate, 5500
series, or SVM series modulator.
Features:
54 MHz to 1 GHz forward bandwidtht
3 dB nominal gain on TV outputst
Maximum input level 20 dBmv t
Can be used in locations without electrical access and powered t
remotely with a Linear modulator or the Model 2010 Wall Plate
6.5” W x 1.25” H x 4.5” Dt
DA-8200BID Bi-Directional RF Distribution
Amplifier with 5-Volt IR
ORDERt # DA-8200BID
The Model DA-8200BID Bi-directional RF Distribution Amplifier with
5-volt IR is the heart of a multi-room distribution system with outputs
to eight televisions with coax runs up to 150 feet. The Model
DA-8200BID has three inputs, one from CATV and two from Linear
5400, 5500, or SVM series modulators. The Model DA-8200BID
can handle an extremely wide range of input signals from NTSC
and digital TV. The Model DA-8200BID offers a 5–42 MHz bandwidth
return path for bi-directional communication for use with digital cable
interactive set-top boxes. The Model DA-8200BID can be powered locally
with its included power supply or remotely from up to 75 feet away
by using an in-wall power injector wall plate Model 2010 or any
5500 series or SVM series modulator. The Model DA-8200BID
features optional IR control of connected video sources and whole-
house IR integration with a built-in 5-volt IR engine. Model 2133
Set-top IR Targets connect between the amplifier outputs and
the television sets. IR emitters connected to the amplifier, or to
a 5500 or SVM series IR-enabled modulator connected to the
amplifier, will repeat the IR remote control signals back to the video
source component.
Features:
54 MHz to 1 GHz forward bandwidtht
5 MHz to 42 MHz reverse bandwidtht
3 dB nominal gain on TV outputst
Maximum input level 20 dBmvt
Can be used in locations without electrical access and powered t
remotely with a Linear modulator or the Model 2010 Wall Plate
6.5” W x 1.25” H x 4.5” Dt