Specifications

linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
RF Distribution Amplifiers 17
DA-8200HHR High-Headroom RF Distribution
Amplifier with 5-Volt IR
ORDER # t DA-8200HHR
The Model DA-8200HHR High-headroom RF Distribution Amplifier
with 5-volt IR is the heart of a multi-room distribution system
with outputs to eight televisions with coax runs up to 150 feet.
The Model DA-8200HHR has three inputs, one from an off-air
antenna or CATV and two from Linear 5400, 5500, or SVM series
modulators. The DA-8200HHR is used with antenna applications
for off-air digital and NTSC signals.
The Model DA-8200HHR can be powered locally with its included
power supply or remotely from up to 75 feet away by using an
in-wall power injector wall plate Model 2010 or any 5500 series
or SVM series modulator. The Model DA-8200HHR features optional
IR control of connected video sources and whole-house IR integration
with a built-in 5-volt IR engine. Model 2133 Set-top IR Targets connect
between the amplifier outputs and the television sets. IR emitters
connected to the amplifier, or to a 5500 or SVM series IR-enabled
modulator connected to the amplifier, will repeat the IR remote
control signals back to the video source component.
Features:
54 MHz to 1 GHz forward bandwidtht
3 dB nominal gain on TV outputst
Maximum input level 20 dBmvt
Can be used in locations without electrical access and powered remotely t
with a Linear modulator or the Model 2010 Wall Plate
6.5” W x 1.25” H x 4.5” Dt
H838BID
Bi-Directional Video Hub with 5-Volt IR
ORDER # t H838BID
The Model H838BID Bi-directional Video Hub with 5-volt IR (for
use with cable TV feeds) amplifies the incoming signal and provides
outputs to eight television locations in the home. In addition, each
has two modulator inputs to add locally generated channels from
DVD players, satellite receivers, VCRs, digital cable boxes, and
front door, back door, and baby room cameras. Every TV location
in the home receives every cable or antenna channel plus every
modulator-generated video channel. In addition, the Model H838BID
has a built-in IR engine that allows infrared remote control of the
video equipment from any TV location. The Model H838BID has
a return path for bi-directional CATV, perfect for use with cable
modems and pay-per-view boxes.
Features:
Distributes CATV to eight TVs t
Two modulator inputs to add locally generated channels (camera or DVD) t
Bi-directional with a 5–42 MHz return path for cable modems, interactive t
applications, and pay-per-view boxes
IR repeating system using 5-volt targets t
Five enclosure grid spaces t
6.25” W x 3.25” H x 2.25” D t
H838HHR
High-Headroom Video Hub with 5-Volt IR
ORDER # t H838HHR
The Model H838HHR High-headroom Video Hub with 5-volt IR
(for use with off-air antennas) amplifies the incoming signal and
provides outputs to eight television locations in the home. In addition,
it has two modulator inputs to add locally generated channels from
DVD players, satellite receivers, VCRs, digital cable boxes, and
front door, back door, and baby room cameras. Every TV location in
the home receives every cable or antenna channel plus every modulator-
generated video channel. In addition the Model H838HHR has a
built-in IR engine that allows infrared remote control of the video
equipment from any TV location. The Model H838HHR has a high-
headroom amplifier that handles signal differences between high-
powered analog VHF and low-powered digital UHF stations. The
Model H838HHR is used with antennas for off-air digital and
analog TV signals.
Features:
Distributes CATV to eight TVs t
Two modulator inputs to add locally generated channels (camera or DVD) t
High-headroom amplifier t
IR repeating system using 5-volt targetst
Antenna isolation compliant with FCC part 15 requirementst
Five enclosure grid spacest
6.25” W x 3.25” H x 2.25” Dt