Specifications

linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
18 Audio/Video Modulators
3015
2-Input Video Distribution System
ORDER # t 3015
The Model 3015 2-input Video Distribution System accepts a
CATV or antenna input and audio/video signals from one video
source and modulates them to a user-selected channel that can
be seen at four TV locations.
The modulator channel is digitally programmed. Push the channel
select button to choose the desired unused TV channel and the
internal microprocessor digitally sets the modulator to the exact
FCC channel specification. The channel setting is retained in
memory during a power failure.
Features:
All-in-one video distribution systemt
Built-in modulatort
Modulator channel digitally programmedt
Programming retained in memory during power failurest
5.5” W x 6.8” H x 2” Dt
3025 3-Input Video
Distribution System with 5-Volt IR
ORDER # t 3025
The Model 3025 3-input Video Distribution System with 5-volt IR
accepts a CATV or antenna input and audio/video signals from two
video sources and modulates them to two user-selected channels
that can be seen at five TV locations.
The modulator channels are digitally programmed. Push a
channel select button to choose the desired unused TV channel
and the internal microprocessor digitally sets the modulator to
the exact FCC channel specification. The channel settings are
retained in memory during a power failure.
The Model 3025 features optional IR control of connected video
sources and whole-house IR integration with a built-in 5-volt IR
engine. Model 2133 Set-top IR Targets connect between the
amplifier outputs and the television sets. IR emitters connected
to the amplifier will repeat the IR remote control signals back to
the video source component.
Features:
All-in-one video distribution systemt
Built-in modulatorst
Modulator channels digitally programmedt
Programming retained in memory during power failurest
5.5” W x 6.8” H x 2” Dt