Specifications

linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
38 Structured Wiring Enclosures
H312KIT
12” Plastic Enclosure, Includes Cover
ORDER # t H312KIT
The Model H312KIT 12” Plastic Enclosure, Includes Cover provides
grid mounting space for Linear structured wiring components.
The enclosure is ETL Listed and features 19 grid inches of mounting
capacity in two 9.5” columns. Structured wiring modules snap
securely into the enclosure’s mounting grid. Recommended enclosure
for the DMC-10H Structured Wire Intercom Hub.
The enclosure mounts in the wall between standard 16-inch
spaced studs, or it can be surface mounted. The flexi-mount
system features four flexible mounting tabs on the sides of the
enclosure. The flexi-mount tabs compensate for varying stud
spacing and allow for adjusting the depth of the cabinet for flush
mounting with all thicknesses of drywall.
A snap-on cover that can be screwed shut is supplied with the
enclosure. The vented cover has a raised interior, allowing for
easy wiring and better component cooling. Eight combination
conduit knockouts (four along the top, two on the bottom, and one
on each side) that fit either 2” or 0.5” conduit fittings are provided. The
enclosure has an additional knockout on the bottom to mount a
single-gang junction box for AC outlet installation.
Features:
12 inches high t
19 grid inches (two 9.5-inch columns) t
Fits between studs t
ABS construction t
Flexi-mount system (slots and tabs allow for surface or flush mount) t
Electrical J-box knockout on bottom t
Eight combination 0.5” or 2” knockouts, including two located on t
the sides of the box
Paint shield and four Phillips head screws included t
Snap-on vented cover included t
ETL Listedt
H318
18” Enclosure
ORDER # t H318
The Model H318 18” Enclosure provides grid mounting space for
Linear structured wiring components.
Features:
HC18A: Optional enclosure cover (not shown)t
18 inches hight
33 grid inches (Two 16.5-inch columns)t
Fits between studst
16-Gauge all-metal constructiont
Flexi-mount system (slots and tabs allow for surface or flush mount)t
New electrical knockout in bottomt
Eight knockouts, including two located on the side of the boxt
Accepts H290 or H291 Power Accessoryt
Optional H208 Lock availablet
HC18A
18” Enclosure Cover
ORDER # t HC18A
The Model HC18A 18” Enclosure Cover fits on the Model H318
Structured Wiring Enclosure. The ventilated enclosure cover
secures and protects the structured wiring components mounted
inside the Model H318 enclosure. The cover is powder-coated
and painted bright white. The optional Model H208 Lock Kit can
be installed on the cover for additional security.
Features:
Secures and protects components inside the enclosuret
Bright white powder-coated paint finisht
Four louvered vents for enclosure coolingt
Accepts the Model H208 Lock Kit for additional securityt