Specifications

linearcorp.com / 1 800 421 1587
Linear Audio / Video / Data Solutions
54 8-Ohm Speakers
WG100W
WG Series In-Wall Speaker Pair
ORDER # t WG100W
The Model WG100W WG Series In-wall Speaker Pair are 8-ohm,
100-watt, 2-way in-wall speakers. Each speaker has a 6.5-inch
Kevlar cone woofer with butyl rubber surround, a 1-inch aluminum
dome swivel tweeter, and a white aluminum grille. The unique
WG Series horn-shaped speaker baffle is designed for superior
sound dispersion.
The speaker frequency response is 50 Hz to 20 kHz. Two 3-position
±3 db switches allow customization of the woofer and tweeter levels
to best suit the installation. The swivel tweeter permits pointing
the tweeter toward the listening area to pinpoint the high-frequency
sound.
The speakers mount using a rubber-padded cam-lock system.
The cam-lock tabs swing out behind the speaker and tighten
down to secure the speaker to the mounting surface. The speaker
separates from its frame for easy installation. A Model MR6W
Wall Speaker Mounting Ring Pair is required for these speakers.
An IR lens is built into the speaker’s baffle for mounting an infrared
remote control receiver behind the speaker grille. High-quality,
spring-loaded, gold-plated speaker wire terminals ensure good
electrical connection. The grille and frame can be painted if necessary.
Features:
In-wall speaker pair t
White aluminum grille t
Cam-lock rubber-padded mounting system t
6.5-Inch woofer, 1-inch swivel tweeter t
8-Ohm impedance t
100 watts maximum power t
50 Hz to 20 kHz frequency response t
9” W x 12.313” Ht
WG100C
WG Series Ceiling Speaker Pair
ORDER # t WG100C
The Model WG100C WG Series Ceiling Speaker Pair are 8-ohm,
100-watt, 2-way in-ceiling speakers. Each speaker has a 6.5-inch
Kevlar cone woofer with butyl rubber surround, a 1-inch aluminum
dome swivel tweeter, and a white aluminum grille. The unique
WG Series horn-shaped speaker baffle is designed for superior
sound dispersion.
The speaker frequency response is 50 Hz to 20 kHz. Two 3-position
±3 db switches allow customization of the woofer and tweeter levels
to best suit the installation. The swivel tweeter permits pointing the
tweeter toward the listening area to pinpoint the high-frequency sound.
The speakers mount using a rubber-padded cam-lock system.
The cam-lock tabs swing out behind the speaker and tighten
down to secure the speaker to the mounting surface. The Model
MR6C Ceiling Speaker Mounting Ring Pair is required to install
these speakers.
High-quality, spring-loaded, gold-plated speaker wire terminals
ensure good electrical connection. The grille and frame can be
painted if necessary.
Features:
In-ceiling speaker pair t
White aluminum grille t
Cam-lock rubber-padded mounting system t
6.5-Inch Kevlar woofer, 1-inch aluminum dome swivel tweeter t
8-Ohm impedance t
100 watts maximum power t
50 Hz to 20 kHz frequency response t
9” diameter framet