Specifications

14
277
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
277
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
NET 30
Terms
SATV/CATV
section
14
Diplexer
Combines and separates your DBS
satellite and off–air signals. TERK
diplexers deliver sharper cut–off
frequencies, lower signal loss and
better impedance matching. Low quality diplexers
can cause signal loss and poor picture quality.
High quality die–cast aluminum housing.
Specifications: Frequency response: 54~2150MHz.
Impedance: 75ohm. Insertion loss: Antenna, 1dB,
Satellite, 2dB. Return loss: 10dB. Isolation: Antenna,
40dB, Satellite, 40dB. Mfr. #BDS-21BP.
Order # (ea.)
33-7235 $14.95
Satellite Diplexer
•Zinc die-cast housing
•RFI shielding •Power
passive satellite port
•Includes grounding screw
•Bandwidth: 40~2150MHz
Order # (1-9) (10-up)
33-8620 $2.59 $2.07
Budget Diplexer
Zinc plated die cast diplexer
to combine off air television
signals with satellite for ease
of system installation. Power
passive one port. Bandwidth:
40~2150MHz.
Order # (1-9) (10-up)
33-4810 $2.99 $2.56
Diplexer
Combine off air television
signals with satellite for
ease of system installation.
Power passive one
port. Bandwidth:
5~800MHz/950~2050MHz.
Order # Description (1-9) (10-up)
33-4805 Commercial Grade $10.09 $9.35
33-4800 High Performance 6.99 6.17
VHF/UHF/Satellite
Diplexer-Mixer
The TSDM-2150 is a compact
television antenna satellite
diplexer/combiner used in
applications that require
satellite I.F. distribution from 950~2150MHz. The
TSDM-2150 uses a rugged case that allows for
outdoor use. Specifications: •Frequency range:
Satellite: 950~2150MHz, television antenna:
40~860MHz •Connectors: “F” type •EMI
performance: >80dB
Order # (1-9) (10-49) (50-up)
33-2710 $4.99 $4.79 $4.49
Satellite Diplexers
The 4001IFD and 4002IFD
diplexers are used for
separating or combining
satellite signals at 950~2150MHz
with VHF/UHF signals at
54~806MHz. In addition, a DC
power pass is provided from the
satellite port to the common in order to pass satellite
receiver LNB voltage. The 4001IFD is Channel
Master’s standard performance diplexer. The 4002IFD
offers higher performance (much greater stopband
rejection) necessary when combining satellite
and VHF/UHF signals on to one cable because LNB
noise extends down into the UHF spectrum and can
degrade UHF TV reception if not adequately filtered
out before connection to the distribution cable.
Order # Mfr. # (ea.)
33-9415 4001IFD $9.00
33-9420 4002IFD 17.88
Four-Way
Couplers
•For indoor and outdoor use
•RF shielding exceeds FCC
specifications •Maintains 75ohm
impedance on trunk •Full
5MHz~900MHz operational
range •Use 75ohm terminator on
last trunk output (MCM #33-550)
Order # Description (1-9) (10-49) (50-up)
33-1425 16dB $6.25 $5.92 $5.40
33-1430 20dB 6.25 5.92 5.40
33-1435 24dB 6.25 5.92 5.40
LNB Stacking Convertors
Stacking convertors are
designed to allow two LNB
signals to share the same
coax. This allows you to
have all programming
(110° and 119°) at the receiver without running
additional cables. Down–converts the signal at
the receiver (not necessary with Sony
wide–band receivers).
Order # Description (1-9) (10-up)
33-7135 Down–convertor $89.95 $79.95
DISHNetwork
Block Switch
Use with next
generation DBS dishes
for DISHNetwork and
DirecTV to switch between
programming on two
LNBs. Controlled by the
DISHNetwork receiver.
Order # (1-4)
33-6915 $30.29
Fixed Mini-Types
•Nickel plated
solid brass body
•Monolithic ceramic
printed circuit board,
ensuring rugged
construction
•Bandwidth: 5KHz~950MHz •Not DC passive
•5% accuracy •22 gauge steel center pin •Small:
1
3
⁄8" size • “ F” type female to male •75ohm •Three
attenuators to choose from •Sorry–no mixing of
values for quantity pricing.
Order # dB (1-9) (10-49) (50-up)
33-790 3 $3.09 $2.68 $1.77
33-795 6 3.19 2.77 1.84
33-810 12 3.19 2.78 1.84
75ohm In–Line
•6dB attenuation
•5~900MHz frequency.
Order # (1-9) (10-49) (50-up)
33-560 $2.79 $2.37 $2.24
Fixed Mini-Type Attenuator Pads
Features: Nickel-plated,
solid brass body, monolithic
ceramic printed circuit
board, ensuring rugged
construction, etched
glaze-type resistors provide
±5% accuracy and excellent
return loss, small 1.375"
size, 22-gauge spring steel center pin, female
to male fitting, not DC passive. Specifications:
•Bandwidth: 100KHz~1750MHz •Return loss:
20dB typical •Accuracy: ±5%
Order # Description (1-9) (10-up)
33-2750 3dB $1.30 $1.03
33-2755 6dB 1.30 1.03
33-2760 8dB 1.30 1.03
33-2765 10dB 1.30 1.03
33-2770 12dB 1.69 1.34
33-2775 16dB 1.30 1.03
33-2780 20dB 1.30 1.03
High Frequency
Attenuators
General purpose wide band
in–line attenuators to prevent excess signal
overloading of an amplifier or receiver. For ease of
installation one end is male the opposite is female.
Units are power passive. Bandwidth: 40~2150MHz.
Order # Mfr. # Description (ea.)
33-9570 2806IFD 6dB $6.31
33-9575 2810IFD 10dB 6.31
Portable/Remote
Digital Satellite System
•Lightweight, easy to set up and ready to go •Bases
are completely and permanently assembled •Base
has built in level and compass •Convenient handle
for carrying and 25' of cable permanently stored in
the bottom of the base •Perfect for camping, fishing
trips, tailgating and picnics
Order # (ea.)
RD-9046 $171.69
Portable Satellite
Antenna System
This portable
satellite antenna
system is no bigger
than a briefcase.
Enjoy your DSS
system in your RV,
on your boat, while
camping or anywhere
you desire. Multiple
installation options
for mounting on a
wall, balcony rail,
pole, table and the
suction cup makes
mounting a breeze.
Includes: Dish
antenna, LNB,
“C” clamp, suction stand,
carry case and RG-6 cable.
Order # (ea.)
33-4690 $109.00
High Performance LNB
DBS LNB for use with digital
satellite system dishes with
rectangular shaped tubes. Designed
to work with “D” shaped tubes as
well. Perfect low cost replacement
for damaged LNBs.
Order # Description (ea.)
33-7435 Dual LNB $34.95
C52_pg_277 8/13/07 10:12 AM Page 277