Specifications

14
281
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
281
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
NET 30
Terms
SATV/CATV
section
14
Satellite I.F.
Multi-Switch
The TSMS-2150 is a
satellite multi-switch
used in all applications
that require satellite
I.F. distribution
from 950~2150MHz.
Intended for consumer use, it will allow the
residential user to take two LNB inputs plus an RF
input (40~860MHz) and provide four outputs. The
TSMS-2150 will route any of the inputs to any of the
outputs by utilizing the 14V/18V switching control
from the satellite receivers. To compensate for
insertion loss, it utilizes a built–in amplifier.
Specifications: •LNB input frequency:
950~2150MHz •TV antenna •Input frequency:
40~860MHz •Output frequency: Satellite:
950~2150MHz, television antenna: 40~860MHz
•Insertion loss: 950~2150MHz -5dB typical,
40~860MHz -4dB typical •Isolation: Horizon/vertical
-25dB, Output to output -14dB •DC passing
capacity: LNB 1 and 2: 550mA, VHF/UHF: None
•Connectors: “F” type
Order # (1-9) (10-up)
33-2715 $58.75 $51.50
3 x 8
Cascading Multi-Switch
Installations throughout
condominiums, apartment
complexes, hotels and
institutions can share one
dual LNB satellite antenna.
Cascading multi-switches pass the DC control
voltage and satellite signals from one multi-switch
to the next. External power supply powers the
built-in amplifier. An indoor diplexer (sold
separately) separates the combined satellite
and antenna signal at the receiver.
Order # Description (1-9) (10-up)
33-7080 3 x 8 multi-switch $109.00 $101.97
33-7085 Power supply 18.95 15.40
AcuTrac
®
22
Digital Satellite
Signal Level
Meters
The AcuTrac
®
22 allows an installer to easily align a
multi–feed system by displaying LNB A and LNB B
signal strength measurement levels simultaneously.
The AcuTrac™ 22 features include: LCD display,
selectable audio on-off tone, receiver voltage output,
individual LNB current consumption, 22KHz tone and
coax cable test. AcuTracPro includes: Rechargable
battery pack, leather case and AC/DC chargers.
Order # Mfr. # (ea.)
33-7391 Acutrac22 $109.00
33-7395 AcutracPro 189.00
Satellite Meter
Use for easy
installation of
satellite receiver
dishes. The satellite meter operates on the power from
the receiver to LNB. Easy to read digital LCD display
with full text graphics menu and built-in audio tone to
aid in installation. Connect to single, dual or Phase III
LNBF, DishPro, or quad. Coax jumper cable not
included (MCM #32-580).
Order # (ea.)
33-10035 $119.00
RF/Satellite Meter
This hand held CATV/satellite
meter has been designed for
the technician to make quick
and accurate signal strength
measurements for both
CATV and satellite. This
powerful, simple to use tool
measures frequencies from
25MHz~1550MHz. •Measures
satellite from DirecTV,
Dish-Network, CATV and
broadcast signal strength
•Two rows of ten easy-to-read
indicator lights •Hand held
design, great for use with HDTV
•Includes 22KHz tone generator
for use with dual satellite systems
•Requires 9V battery (included)
Order # Mfr. # (1-9) (10-up)
33-9695 M200 $449.00 $410.97
Satellite Signal Level Meters
The 1004IFD, 1007IFD and 1008IFD are intended
to aid in the alignment of a satellite dish. They
include satellite IF (950~2150MHz) amplification
and a broadband detector. The detector drives a meter
and a variable frequency audio tone. The dish is then
aligned for maximum meter deflection or highest pitch
tone. A gain control allows a wide range of input
signal levels. The units are connected to the LNB
via a short coaxial cable. The 1004IFD output must
be connected to the satellite receiver in order to
supply power. The units operate from 11~24VDC
on the coaxial cable. Connection to the receiver
is optional with the 1007IFD and 1008IFD but
extends battery life between charges. All models
allow measurement of voltage on the coaxial cable.
The 1007IFD and 1008IFD will also measure LNB
current. The 1007IFD and 1008IFD includes an
internal rechargeable battery pack, carrying strap
and a wall plug recharging unit. The internal battery
pack allows a dish to be aligned before it is connected
to the satellite receiver. The battery pack is switchable
between 13 and 18V output, allowing either
polarization to be selected when used with a voltage
switched LNB. In US DBS applications, LHCP is
selected when the LNB voltage is nominally 17V.
Order # Mfr. # (ea.)
33-9295 1004IFD $105.48
33-9300 1007IFD 263.64
33-9305 1008IFD 348.00
Satlook
Spectrum Analyzer
Perfect 10 Satlook is a
measuring instrument
developed for exact
alignment and adjustment
of satellite dishes.
The instrument
features a 4
1
⁄2"
B/W monitor
which either
shows normal
TV channel or
the frequency
spectrum 950~2150MHz. Detection of satellite
signals is made easy. Spectrum mode and the
spectrum can be expanded for correct adjustment
of the polarization. Switching between spectrum/TV
mode is made easy by the push of a button. LNB
polarization is switchable, 13V/18V and indicated
by an LED. The instrument is short circuit protected
when connecting the LNB. Power is supplied by a
built–in rechargeable battery and is recharged from
the external battery charger or the car adaptor.
Charging of the battery is supervised by a
microprocessor which senses when the charging
of the battery is maximized. Charging is indicated
with “CH” on the two digit LED display.
Order # (ea.)
33-3255 $823.00
Suunto Tandem
Inclinometer/Compass
The Suunto Tandem is two precision
satellite tools in one. Slope/height
(inclinometer) measurements are
easily done through the sight to alert
you to possible obstructions. Accurate
satellite bearings can be found with
the liquid filled precision compass.
Mfr. #PVCOMAF.
Order # (ea.)
33-7420 $199.00
Sat-Finder
Satellite Meter
The Sat-Finder makes it
easy to find maximum
satellite signal. Simply
connect between the
satellite receiver and the LNB to precisely align
the dish in seconds. The Sat-Finder has a faster
response time than the receiver’s signal strength
meter for more precise adjustments.
Order # (1-9) (10-49) (50-up)
33-7725 $24.95 $24.50 $23.75
Compass
Economical compass for easily identifying
satellite positions. Small size fits in
the palm of your hand. Top
closes to protect surface
from scratches.
Specifications:
•Directional accuracy: ±5° •Direction indication:
2°/scale •Dimensions: 72mm x 55mm x 30mm
Order # (ea.) (2-10) (11-up)
33-2050 $5.34 $4.87 $3.81
Satellite Dish Level
Attaches to the dish support to
quickly tell if the dish is plumb
and level. Mfr. #PVLEV1.
Order # (ea.)
33-7425 $2.99
Satellite Finder Kit
The satellite finder kit makes aligning a dish
simple and easy. The satellite finder attaches to the
output of the LNB or LNA and supplies power to the
LNB/LNA via the battery holder, or hook the finder
in-line with the receiver. Works with C or K band
satellites and DSS/DBS. Specifications: Frequency
range: 950~1550MHz, power supply: 12~18VDC,
60mA, input sensitivity: 62~80dB, impedance:
75ohm. Kit includes: •Satellite finder, compass,
RF jumper cable and battery holder all in a vinyl
carry case •Use #27-1335 battery pack for
DSS applications
Order # (kit)
33-1975 $49.99
C52_pg_281 8/13/07 10:17 AM Page 281