Specifications
284
Order Online
www.mcmelectronics.com
NET 30
Terms
14
SATV/CATV
section
14
Ground Clamps
A properly grounded antenna or satellite system
will not suffer from the effects of ground loops.
These ground loops can be identified as beat and
herringbone in the picture. Available in
3
⁄8" and
5
⁄8" for
connecting to ground rods and two piece clamps for
connecting to
1
⁄2" to 1" water pipes.
Fig. Order # Diameter (1-9) (10-up)
A 33-6895
3
⁄8" $1.79 $1.25
B 33-6900
5
⁄8" 2.09 1.64
C 33-6905
1
⁄2"~1" 2.89 2.46
A
B
C
Split Bolts
Quickly and securely connects
ground wires together. Connect
the ground for an antenna or
DSS to the house ground.
Available in two sizes.
Order # Dimensions (1-9) (10-49)
33-7020
1
⁄2" x 1
1
⁄4" $4.39 $4.03
33-7025
3
⁄8" x 1" 1.89 1.74
4' x
3
⁄8" Universal Grounding Rod
The 4' universal grounding rod is ideal for
completing your system installation. The copper
coated steal construction prevents ground
loop problems.
Order# (1-9)
33-9700 $5.49
Ground Wire
Type THHN wire commonly used as ground wire.
10AWG stranded or solid copper with oil and gas
resistant coating. Available in stranded and solid.
Order # Description (ea.) (2-up)
24-5365 Stranded, 500' spool $129.94 -
24-5370 Solid, 500' spool 129.94 $107.06
24-5375 Solid, sold per foot 1.11 0.88
SlimLine
Coupler
This flat, flexible
coupler allows you to run cables into a house or
apartment without drilling holes in the house of
window frame. Simply put the cable through the
window and close, the coupler will bend easily
around the window pane.
Order # (ea.)
33-7430 $8.29
Guy Wire
•18 gauge, 6 strand heavy-duty guy wire •Vinyl
coated to reduce effects of weather •Length: 100'
Order # (ea.)
30-1055 $8.19
“J” Pipe Mount
Designed for outdoor antenna use and can
be used on the roof or side of the house. The
mount foot can be used on either end of the
pipe for most efficient mounting. •Galvanized
steel • 38" long •Wall thickness: .060" •1.66"
OD and E–Coated for maximum protection.
Order # (ea.) (2-up)
DS-3000 $29.95 $25.70
DBS Pipe Adaptor
Install a DSS, Dish Network or Prime
Star dish to any antenna mast or pipe
with this pipe adaptor. Works with
RCA, Panasonic, Echo Star and other
DSS dishes. Mfr. #QPA-1.
Order # (ea.)
33-4935 $16.29
DSS
Rear-Mount
The DSS rear–mount attaches
quickly to the existing bolts
on the rear of the DSS dish
allowing for mounting of
a local broadcast antenna.
Order # (1-9) (10-up)
30-1520 $12.09 $10.39
Heavy–Duty Antenna Mounting Accessories
•Heavy–duty mount for masts up to 1
1
⁄2" outer
diameter •Made of all steel construction
•Triple coat corrosion protection
Fig. Order # Description (ea.)
A 30-895 Roof mount $6.65
B 30-900 4" wall mount 6.65
C 30-905 8" wall mount 7.68
D 30-910 “Z” chimney mount 10.24
E 30-915 “Y” chimney mount 16.95
F 30-1160 Vent pipe mount 10.24
D
F
E
B
C
A
Antenna
Mounting
Hardware
Fig. Order # Description Qty. (pkg.)
A 30-1030 Guy wire clamp up to 1
1
⁄2" mast 1 $3.58
B 30-1035 Turnbuckle - 7" open, 5" closed 3 4.09
C 30-1045 Cable clamps
1
⁄2" open
1
⁄8" closed 3 1.53
A
B
C
Tripod
Roof Mounts
•Mounts TV antennas without
guy wires •Self supporting
•Extra heavy–duty with
rotamast feature •Fits mast up
to 1
3
⁄4" •Six screw mast support
Order # Size (ea.)
30-925 3' $22.17
30-930 5' 30.25
Dura-Tube
®
Antenna Mounts
Channel Master DURA-TUBE
super alloy is the steel masting
with the double overcoat for
lasting beauty and protection.
Channel Master starts with the
finest quality high tensile steel
tubing and receives a powder
coat painted overcoat. The
end result is a super tough
weather protected mast that
is 50% stronger than high
carbon steel masting of
the same diameter.
Order # Mfr. # Description (ea.)
30-1725 9003 3' tripod mount $33.66
30-1755 1607 5' mast, 16 GA 8.69
Eve Mounts
Alternative to roof and chimney mounts. Fits most
any medium pitch roof. Adjusts from 43" to 60".
Accepts up to 1
1
⁄2" masts. Includes mounting
hardware. Zinc finish.
Order # (ea.)
30-1085 $22.17
Masts
16 gauge corrosion protected mast ideal for television
and communication antennas. 5' section swagged at
one end. 2
1
⁄2' section ideal for use above rotator.
Order # Size (ea.)
30-1080 2
1
⁄2' $3.58
30-935 5' 6.05
Antenna Lances
Antenna lances are a quick and easy way of
mounting small antennas to attic trusses or rafters.
1" diameter to accommodate standard antenna
mounting hardware.
Order # Length (ea.)
30-1605 18" $4.15
30-1610 24" 5.19
“D” Rings
Use for attaching wires and cables
to structures and to support cable
runs and electrical wiring.
Bright galvanized steel.
1
1
⁄4" eyelet and 1
1
⁄4" nail.
Order # (1-9) (10-49) (50-up)
33-8615 $1.79 $1.74 $1.53
TV Line Clips
•For antenna lead hook–ups •High–quality construction •For quick
connection of 300ohm twin lead to antenna terminals •Two per package
Order # (1-9 pkgs.) (10-49 pkgs.) (50-99 pkgs.)
33-610 $1.24 $1.06 $0.85
C52_pg_284 8/13/07 11:15 AM Page 284