Specifications
14
295
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
295
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
NET 30
Terms
SATV/CATV
section
14
High Definition
Automatic Switcher
•Hook up multiple video game systems, DVDs, VCRs,
and any other A/V device to any TV that lacks the
required number of AV inputs •4 inputs allow you to
automatically switch between desired components
•Features 4 audio/video, S-video, and component
inputs; composite, S-video and component out
•Component inputs provide ultimate picture
performance and are found on most quality
TVs/HDTVs and DVDs •Easy to hook-up and
prevents cable swapping issues that could result in
the jacks on the TV needing to be replaced.
Order # (1-4)
PH61150 $29.95
Back
Audio/Video Amplifers
•Perfect for in–store display demonstration walls
or karaoke display •One input distributes four
or six amplified outputs •Video and stereo sound
input via RCA jacks •Four or six outputs, video
and stereo sound via RCA jacks •Frequency range:
•20Hz~10KHz •Isolation: 30dB minimum •Video
input: 75ohm •Audio input: 20Kohm •Operates
from 15V/300mA adaptor •Adaptor included
Order # Description (ea.)
32-4430 Four-way $29.95
32-4435 Six-way 39.95
S–VHS A/V Switch
S–VHS A/V selector
switch for use with
DSS, DVD and other
video products with Y/C (S–VHS) outputs. Four
Y/C inputs for video and four RCA stereo inputs for
audio to one Y/C output and one RCA audio output.
Specifications: Band width, 20Hz~10MHz.
Isolation: 30dB minimum.
Order # (ea.)
33-4135 $19.95
Video Source
Selector
•Easily
connects
up to four home theater components to one output
•S-video or composite audio/video connections
•Includes remote control
Order # (ea.)
VH915 $54.95
Three-Way Audio/
Video Switch Box
Tabletop control box
allows selection of
multiple A/V sources.
Ideal when connecting
several devices, such as CCTV cameras, camcorders,
VCRs, laser disk players and satellite receivers to a
single video monitor or VCR. Accommodates video and
left and right audio, all connections are all RCA type
female. Metal case has non-skid rubber feet and stays
securely in place. Dimensions: 6.9" (W) x 2.2" (H) x
3.9" (D). Sloped front, black color.
Order # (1-5) (6-9) (10-up)
50-6195 $18.49 $17.02 $14.27
BACK
Six-Way Video Selector
Tabletop video switcher provides independent
selection of up to six A/V sources, routing them to
two different destinations. Select from inputs such
as a satellite receiver, digital cable box, DVD player,
DVR, VCR or video game. Dual outputs, with
independent selectors, allow easy recording of one
source, while viewing another, or viewing of two
different sources on separate monitors. Inputs and
outputs are standard line level L/R audio, composite
video, and S-video. S-video connections are standard
four-pin DIN female, all others are RCA type
female. Rugged metal enclosure measures 1
3
⁄4" (H) x
11
1
⁄2" (W) x 5
1
⁄4" (D), including non-skid rubber feet.
Note: Either composite or S-video inputs may be
utilized, but not both. This selector will not convert
from one video format to the other. Passive device
requires no power.
Order # (1-3) (4-up)
50-7780 $37.89 $35.12
Rear
Panel A/V
Extenders
Easily
connect and re-connect video games, camcorders
and portable audio/video devices to your television’s
audio/video inputs without having to turn the
television around each time. These extenders will
save your back from strains and virtually eliminate
the danger of dropping your television every time
you plug into the A/V inputs. Standard A/V inputs
via “RCA” type jacks on the front or side of your
television and “RCA” type plugs for the rear.
Available with S-video capability for such
equipped devices.
Order # Description (ea.) (2-4) (5-up)
24-6595 A/V and S-video (shown)$14.95 $13.50 $12.00
24-6600 A/V only 12.95 11.50 10.75
#24-6595
Video Ground Loop
Isolator
Ground loops
in composite
video systems
can cause video distortions such as
herringbone and AC beat. Uniquely
designed to eliminate ground loop related distortions,
this transformer features RCA female-to-female
connectors with a separate 9' RCA male-to-male
pigtail cable that facilitates multiple installation
configurations and helps reduce cable connector
strain. Specifications: •Insertion loss: <0.5db
•Frequency response: 0~3db @ 10MHz •Input/output
resistance: 75ohm •Built in 600VDC transient
voltage surge suppression (12V RMS) •No power
required (passive).
Order # (1-3)
33-6927 $29.95
T
Composite Video to
S-Video Adaptor
This high quality adaptor
converts composite video to
S–video and S–video to
composite video. With a male S–VHS connector on
one end and a female RCA type connector on the
other (#33-0001), only a standard RCA type video
cable is required for connection or you can match
the S-video adaptor to your cables. The adaptor
measures only 1
3
⁄4" long and
1
⁄2" in diameter allowing
it to plug directly into the equipment and solves the
problems associated with mixing composite and
S–video inputs and outputs. Note: This unit is a
passive device and although it will allow composite
video signals to be used in S–video inputs the signal
will remain the quality of composite video.
Order # Description (ea.) (2-up)
33-0001 S male to RCA female $7.39 $7.10
33-0002 S female to RCA female 5.99 5.77
33-0003 S female to RCA male 5.99 5.77
A/V Digital Analog Selector with IR Remote
Full-featured switcher connects up to three
“like-kind” sources (HDMI to HDMI, VGA to VGA,
etc.) to a single HDTV display. Features: •HDMI,
VGA, RGB component video, and composite A/V
connections •Delivers clean, uncompressed digital
signals •Engineered for optimal signal transfer
and minimal signal loss •Built-in HDMI output
signal extender up to 100' (total length) •H.D.C.P.
(High-Bandwidth Digital Content Protection)
Compliant •Supports high definition 1080p and
UXGA •Compact, time-saving LED illuminated
control center and easy selection with remote
control or front panel push-button controls
•Power: 6V,400mA AC/DC power adaptor
(included) •Dimensions: 12
1
⁄
2
" x 6" x 2
1
⁄
4
".
Order # (ea.)
33-10424 $159.00
Back
Front
S-Video Distribution Amplifier/Selector
Tabletop distribution amplifier allows selection
between two A/V inputs and provides six outputs.
Separate paths are provided for composite video and
S-video sources. Independent left and right audio
signal paths allow compatibility with stereo sources.
Front panel pushbutton AV1 or AV2 input source, or
select automatic mode, which sets AV2 as the default
input, automatically switching to AV1 when a signal is
present (switching based on the presence of audio
signal). An internal amplifier maintains signal quality
when distributed to all six outputs. Gain at each
output is 2dB over input signal level. Front panel
1
⁄4"
stereo headphone jack, with level control. Rugged
metal enclosure measures 1
3
⁄4" (H) x 11
1
⁄2" (W) x 5
1
⁄4"
(D), including non-skid rubber feet. Note: Either
composite or S-video inputs may be utilized, but not
both. Requires 12VDC, AC adaptor included.
Order # (1-3) (4-up)
50-7775 $59.95 $55.57
BACK
C52_pg_295 8/13/07 11:06 AM Page 295