Specifications

272
Order Online
www.mcmelectronics.com
NET 30
Terms
14
SATV/CATV
section
14
RF Amplifiers
Low noise VHF/UHF/FM
signal amplifiers.
Variable gain control
–10dB. Built–in FM trap
(-20dB). Specifications:
Frequency range:
40~862MHz. Noise
figure: <7dB.
Power: 120VAC.
Fig. Order # Outputs Gain (1-9) (10-up)
A 33-8715 1 30dB $12.95 $12.43
B 33-8720 2 25dB 13.95 13.47
C 33-8725 4 20dB 15.95 15.37
A
B
C
RF Amplifiers
VHF/UHF/FM signal amplifiers for residential cable
and antenna television. 40~862MHz bandwidth.
<6dB noise figure. Operates on 120VAC.
Fig. Order # Outputs Gain (1-9) (10-up)
A 33-8730 1 10dB $8.31 $7.27
B 33-8735 2 10dB 10.39 9.63
C 33-8740 4 5dB 13.49 12.59
A
BC
UHF/VHF/FM 25dB
Features: •Low
noise •High overload
capacity •Lightning
protection at RF
input •Heavy gauge
metal case •On-off
indicator light •Switchable FM trap Specifications:
•Bandwidth (MHz): VHF 54~300; UHF 470~890
•Gain: VHF, 25dB; UHF, 23dB •Maximum input
(dBmV): •VHF, 15; UHF, 17 •Maximum output
(dBmV): VHF, 40; UHF, 40 •Noise figure (dB): VHF,
low 5.4, high, 6.2; UHF, 14 •Power requirements:
117VAC •Dimensions: 6
5
⁄8" (W) x 1
7
⁄16" (H) x 3
3
⁄32" (D)
Order # (1-9) (10-up)
33-290 $24.95 $23.64
UHF/VHF/FM 12dB
Features: •Low noise
•High overload capacity
•Lightning protection
•Heavy gauge metal
case •On-off indicator
light Specifications:
•Bandwidth (MHz): VHF 54~216; UHF 470~890
•Gain: VHF, 12dB; UHF, 10dB •Noise figure (dB):
VHF, 6; UHF, 7.7 •Input capability (dBmV): 40
(100mV), 20 (10mV) •Input: 75ohm •Output: 75ohm
•Power requirements: 117VAC; 60Hz •Dimensions:
6
5
⁄8" (W) x 1
7
⁄16" (H) x 3
3
⁄32" (D)
Order # (1-9) (10-up)
33-280 $20.95 $19.24
UHF/VHF/FM
25dB Amplifier
•Low noise
•Lightning
protection •AC
power indicator
•Switchable FM
trap •Low cost Specifications: •Bandwidth:
54~900MHz •Gain: VHF, 25dB; UHF, 22dB
•Maximum input: VHF, 18dB; UHF, 16dB •Maximum
output: 40dB (54~800MHz) •Noise figure: VHF, 5dB;
UHF, 7dB •75ohm input/output •Power requirements:
115VAC; 60Hz •Dimensions: 5
7
⁄8" (W) x 1
5
⁄8" (H) x 3" (D)
Order # (1-9) (10-up)
33-0450 $29.99 $28.32
VHF/FM 20dB Amplifier
•50~450MHz bandwidth •20dB
gain •40dB output capability
•117VAC power requirement
•Dimensions: 3
1
⁄2" (W) x 2
1
⁄4" (H)
x 1
1
⁄2" (D)
Order # (1-9) (10-up)
33-270 $20.95 $20.07
VHF/FM 10dB Amplifier
•50~300MHz bandwidth
•10dB gain •30dB output
capability •117VAC power
requirement •Dimensions:
3
1
⁄2" (W) x 2
1
⁄4" (H) x 1
1
⁄2" (D)
Order # (1-9) (10-up)
33-260 $13.95 $12.31
Four-Way
Amplified Coupler
•50MHz~550MHz
bandwidth •1~3dB gain
•117VAC power required
•One input, four outputs
•Dimensions: 3
1
⁄2" (W) x
2
1
⁄4" (H) x 1
1
⁄2" (D)
Order # (1-9) (10-up)
33-1475 $12.50 $11.82
Two-Way Amplified Coupler
•50MHz~550MHz
bandwidth •4~6dB gain
•117VAC power required
•One input, two outputs
•Dimensions: 3
1
⁄2" (W) x
2
1
⁄4" (H) x 1
1
⁄2" (D)
Order # (1-9) (10-up)
33-1460 $13.95 $12.35
ZTA-25
Specifications: RF:
•Frequency range:
470~890MHz •Input level
min: -8.5dB •Input level
max: +22dB •Gain:
25dB(LB/FM), 22dB(HB),
18dB(UHF) •Noise figure: 5.0dB(VHF), 7.0dB(UHF)
•Output level max: +47dBmV •FM trap depth
(95~108MHz): -25 •Impedance all ports: 75ohm
General: •Power requirements: Voltage: 117VAC,
±10% •Frequency: 60Hz •Power: 3.0W •Mfr. #ZTA-25
Order # (1-9) (10-up)
33-2855 $26.01 $24.71
15dB Amplifier
Specifications: RF:
•Frequency range:
54~220MHz,
470~900MHz •Input
level min: -7.0dB
•Input level-max:
+18dB •Gain: 16dB
(50~22), 12dB (470~800), 10dB (800~900) •Noise
figure: 3.0dB (VHF), 4.0dB (UHF) •Output level max:
+44dBmV •Impedance all ports: 75ohm General:
•Power requirements: •Voltage: 117VAC, ±10%
•Frequency: 60Hz •Power: 4.2W •Mfr. #ZTA-15
Order # (1-9) (10-up)
33-2850 $16.95 $16.43
Broadband
Distribution
Amplifiers
The ZCM Series includes
professional quality,
broadband distribution
amplifiers, designed
for special purpose
applications in the MATV,
SMATV, private and
wireless cable markets.
These amplifiers cover
the 50~550MHz
frequency range and
provide low noise
amplification at a
reasonable cost. Two
models are available with
either 10 or 20dB of gain,
each capable of accepting
a relatively high input level. Specifications:
ZCM-101 RF: •Frequency range: 50~550MHz
•Gain: 10dB •Noise figure: 3.5dB •Impedance-all
ports: 75ohm General power requirements:
•Voltage: 117VAC, ±10% •Frequency: 60Hz •Power:
1.2W •Connectors (top panel): •RF input: Type “F”,
female RF output: Type “F”, female ZCM-201 RF:
•Frequency range: 50~550MHz •Gain: 20dB •Noise
figure: 3.5dB •Impedance all ports: 75ohm General
power requirements: •Voltage: 117VAC, ±10%
•Frequency: 60Hz •Power: 1.4W •Controls
(top panel): Tilt: Var. Control •Connectors
(top panel): RF Input: Type “F”, female
•RF output: type “F”, female
Order # Mfr. # (1-9) (10-up)
33-2840 ZCM-101 $14.95 $14.68
33-2845 ZCM-201 21.50 20.81
#33-2840
#33-2845
Multiple Dwelling
Amplifier
This
professional
quality, broadband,
indoor hybrid distribution
amplifier is designed for RF
distribution systems, such as apartment complexes,
hospitals, schools, prisons, and hotels. It is ideal for
those RF distribution systems whose input source is a
cable drop, the output of a MATV/SMATV headend, or
the output of a small CATV headend. The ACA 30-550
amplifier has a flat 30dB of operational gain, which is
variable using a built-in gain control. Variable slope
control is also provided, with an available range of
9dB. This amplifier uses a push-pull technology,
capable of delivering high output levels with low
distortion, even in systems with 110 channels of
programming. It is housed in a compact, aluminum
chassis that provides excellent heat dissipation,
allowing the ACA 30-550 to be operated at high
ambient temperatures with no degradation of
performance or reliability. The ACA 30-550 is provided
with an external power transformer for use with
117VAC power. The unit can also be powered directly
with 24VAC. The superior design guarantees long
service at an affordable price. This high performance
hybrid amplifier is the obvious selection when cost
and performance parameters are extremely tight.
Specifications: RF: •Frequency range: 47~550MHz
•Gain: 32dB •Noise figure(a): 8.0dB •Output level:
+44dBmV •Gain control range: 15dB •Slope control
range: 10dB •Impedance all ports: 75ohm
•Mfr. #ACA 30-550
Order # (ea.)
33-2875 $263.00
See page 295
for more ground
loop isolators.
C52_pg_272 8/13/07 10:06 AM Page 272