Specifications

14
273
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
273
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
NET 30
Terms
SATV/CATV
section
Broadband Distribution Amplifiers
The ZTA Series are broadband distribution amplifiers designed for special purpose applications in the MATV, SMATV,
private and wireless cable markets. These amplifiers provide high output and low noise amplification at a reasonable cost.
Several models are available for VHF, FM, and UHF signal reception. The ZTA Series products are available with a number
of gain levels so that a unit can be selected to fit most systems. The amplifiers come with a variety of features, including
separate VHF and UHF antenna inputs, FM traps, and individual gain controls for VHF and UHF. The combination of split band
amplification and low noise input circuitry results in a wide dynamic range and exceptional output capability. The ZTA Series
products are UL and CSA approved and all models come with lightning and surge protected power supplies, thereby ensuring
years of reliable operation.
Broadband Amplifiers
The BIDA Series are
professional quality,
broadband, two-way capable,
indoor hybrid distribution
amplifiers that are designed
for RF distribution systems,
such as apartment
complexes, hospitals,
schools, prisons, hotels, and
a wide variety of similar
applications. The BIDA
Series is ideal for
multi-channel RF distribution systems whose
input source is a “cable drop” or the output of a
MATV/SMATV/CATV headend. Additionally, the
BIDA Series may be used as the launch amplifier in
a distribution network. These amplifiers use dual
push–pull hybrid modules, capable of delivering high
output levels with low distortion, even in systems
with over 100 channels of programming. Power
doubling models can be cascaded together with lower
distortion resulting than the push–pull amplifiers
allowing the system to maintain higher signal
integrity. The gain and slope controls are designed
between the hybrid modules for optimum noise
figure, input return loss and output capability. Test
ports for both the input and output are provided for
testing signal levels without interrupting service.
The BIDA Series come in a rugged, aluminum
chassis that provides exceptional heat dissipation.
This allows the BIDA Series to be operated at high
ambient temperatures with no degradation of
performance or reliability. The combination of
features and durable construction ensures that the
BIDA Series will provide years of reliable,
trouble-free service.
Bandwidth Gain
Order # MHz dB Description (ea.)
33-7815 49~550 50 Push–pull $559.00
33-7820 49~750 32 Push–pull 589.00
33-7850 49~860 44 Push–pull 679.00
33-7855 49~860 44 Power doubling 749.00
ZTA-45
Specifications: RF: •Frequency range:
54~216MHz, 470~806MHz •Input level min:
-7.0dB(LB/FM), -6.0dB(HB), -6.8dB(UHF) •Input level
max: +14dB, 36dB(LB/FM), 35dB(HB), 37dB(UHF)
•Noise figure: 6.0dB(LB/FM), 7.0dB(HB), 6.2dB(UHF)
•Output level max: 49dBmV •Gain control range:
18dB FM trap depth (95~108MHz): -18 •Impedance
all ports: 75ohm General: •Power requirements:
Voltage: 117VAC, ±10% •Frequency: 60Hz •Power:
15.0W •Mfr .#ZTA-45
Order # (ea.)
33-2865 $226.00
ZTA-35
Specifications: RF: •Frequency range:
54~216MHz, 470~806MHz •Input level min:
-7.0dB(LB/FM), -6.0dB(HB), -6.8dB(UHF) •Input level
max: +14dB, 36dB(LB/FM), 35dB(HB), 37dB(UHF)
•Noise figure: 6.0dB(LB/FM), 7.0dB(HB), 6.2dB(UHF)
•Output level max: 49dBmV •Gain control range:
18dB •FM trap depth (95~108MHz): -18 •Impedance
all ports: 75ohm General: •Power requirements:
Voltage: 117VAC, ±10% •Frequency: 60Hz •Power:
15.0W •Mfr. #ZTA-35
Order # (ea.)
33-2860 $139.99
Antenna Preamplifiers
Superior performance rated, mast mounted
preamplifiers for any home installation requirement.
Featuring modern design, a high impact polypropylene case
and simplified mounting. Compact indoor transformer and
Power Adder are included with all models. Available to meet
any amplification requirement. Note: All amplifiers operate
on VHF LB, VHF HB and UHF. Individually packaged in
display boxes.
Amplifier Noise
Gain Figure
Order # Mfr. # Description Ch. dB Ch. dB (ea.)
30-1135 5120 All channel amplifier. 2~13 14 2~13 5.0 $71.70
Single 300ohm UHF/VHF 14~69 19 14~69 3.5
antenna input. 300ohm output. 70~83 18 70~83 5.2
30-1140 5123 All channel amplifier. 2~13 15 2~13 5.0 72.95
300ohm UHF/VHF antenna 14~69 19 14~69 4.0
input. 75ohm output. 70~83 18 70~83 4.9
30-1155 5124 All channel amplifier. Separate 2~13 15 2~13 5.0 70.65
300ohm UHF and VHF antenna 14~69 20 14~69 3.5
inputs. 75ohm output. 70~83 19 70~83 4.7
14
CATV Security Tool
•Precision machined,
high-quality security
tool for connecting and
disconnecting cables
protected by a security
sleeve •Long shaft fits
all types of sleeves
Order # Description (ea.)
33-0025 Security tool $6.69
33-0030 Security sleeve 0.49
Ground Isolation
Transformer
5MHz~2.4GHz
bandwidth for use
in antenna, cable
television and satellite systems. Reduces the
effects of ground loops such as herringbone,
beat and audio hum.
Order # (1-9) (10-up)
33-8700 $17.95 $15.40
Voltage Blocking Coupler
•Blocks DC and low
frequency AC power •Solid
brass body with nickel
plating •Female to male
fittings •22 gauge spring
steel center pin •1~1000MHz
bandwidth •16dB return loss
•0.3dB insertion loss
Order # (1-9) (10-up)
33-0020 $2.51 $2.17
75ohm TV
Interference Filters
•Used in
cable or antenna
systems to remove
interference affecting
picture quality
Order # (1-9) (10-99) (100-up)
33-0070 $2.79 $2.41 $1.89
In-Line 950~2150MHz Amplifier
Features: Die-cast
housing, low noise: 4dB,
high gain: 20dB, passes
DC through for powering
LNBs, sloped gain for
long cable runs, voltage supplied by the satellite
receiver Specifications: •Noise figure: 4dB •Gain:
950MHz: 15dB, 1450MHz: 18dB, 1750MHz: 20dB,
2150MHz: 21dB •Maximum output: 30dBmV (12
channels) •DC voltage: 15~18VDC (negative ground)
•Connectors: “F” type
Order # (1-9) (10-up)
33-2720 $13.64 $10.66
Satellite Line
Amplifier
The 5113IFD is a general purpose, low cost satellite
IF (950~2050MHz) line amplifier with 14dB gain
at 1450MHz and appropriate gain between 950 and
2050MHz to give cable slope compensation. Typical
applications include: Long runs of coaxial cable
(greater than 100') from satellite receiver to LNB,
satellite IF distribution system where signal levels
may have become marginal towards the end of the
system, splitting a signal many ways which might
cause excessive splitting loss. Includes two
amplifiers in one housing. This is for dual
cable, dual polarization systems.
Order # Mfr. # (ea.)
33-9440 5113IFD $9.95
In–Line
Satellite Amplifier
Ideal for long cable
runs. 20dB gain. Die
cast housing. Powered
by satellite control voltage.
Order # (1-9) (10-up)
33-8645 $3.11 $2.67
C52_pg_273 8/13/07 10:07 AM Page 273