Specifications

274
Order Online
www.mcmelectronics.com
NET 30
Terms
14
SATV/CATV
section
14
In-Line Amplifiers
Specifications: •Bandwidth:
5~950MHz •Gain: 11dB
•Maximum input: 20dB
•Maximum output: 31dB
•Noise figure: 4dB •Power
requirements: 15VDC •Dimensions: 2
1
⁄2" (L) x
5
⁄8"
(dia) #33-910 DC Passive: For satellite 70MHz
in-line amplification when power dividers, low
gain LNAs and down convertors require additional
gain. #33-917 Non-Passive: For MATV/CATV
applications when antenna preamplification and
line amplification is required. #33-915 Power
Supply: Provides power supply (15VDC) and
diplexer for #33-917 and 33-910.
Order # Type (1-9) (10-up)
33-917 Non-Passive Amp $12.95 $11.41
33-910 DC Passive Amp 13.95 11.93
33-915 Power Supply 13.49 12.59
#33-917
#33-910
#33-915
In-Line Amplifier
DC line powered
amplifier for CATV
or antenna applications. Bandwidth is 5~950MHz.
Gain is 10dB. Use with #33-915 power supply.
Order # (1-9) (10-up)
33-2690 $6.96 $6.44
Indoor/Outdoor
In–Line Amplifier
Amplifies satellite and
terrestrial signals to
compensate for splitters and long cable runs. TERK
amplifiers are designed for optimum performance
in TV and satellite. Lesser quality amplifiers do not
offer extended bandwidth and gain flatness resulting
in poor picture quality. High quality die–cast
aluminum housing. Specifications: Frequency
range: 54~2150MHz. Slope compensation gain: 11dB
@ 54MHz, 20dB @ 2150MHz. Noise figure: <5dB.
Input/output impedance: 75ohm.
Order # Mfr. # (ea.)
33-7220 BIA-20BP $24.99
10dB Micro Amplifier
10dB micro amplifier with
45~1000MHz bandwidth. Soldered
back ensures 130dB RFI
shielding. Heavy
duty tin plated
zinc housing.
Specifications:
Noise figure: 7dB.
Power: 12VDC, 100mA.
via included adaptor
(using “F” cable).
Order # (1-9) (10-up)
33-7125 $19.95 $14.99
Bi-Directional
CATV Amplifiers
Digital amplifiers with
return path for use with
CATV convertors (pay per view) and cable modems.
Soldered back ensures isolation and signal integrity.
Specifications: Bandwidth: 54~1000MHz. Noise
figure: 3.5dB. Power: 12VDC, 250mA via included
adaptor (using “F” cable).
Order # Forward Gain Reverse Gain (1-9) (10-up)
33-7110 15dB 0dB (Flat) $44.95 $41.15
33-7111 15dB 10dB 44.95 39.95
33-7115 15dB 15dB 59.95 55.56
33-7116 20dB 15dB 59.95 54.95
DA-520A
The DA-520A is a
bi–directional amplifier
providing 20dB of forward
gain and 0dB reverse gain. Specifications:
Bandwidth: 54~806MHz. Gain: 20dB +/- 1dB.
Order # (ea.)
DA-520A $67.99
ChannelMax
®
Outdoor Antenna Amplifier
Amplifies weak UHF/VHF television signals. Increases
incoming signal by 20 times. Consists of antenna boom
mounted amplifier, UL/CUL listed power supply, 6' RG-59 coaxial cable, weather boot. Packaged in a clear, clam
shell blister pack for optimum consumer appeal. Specifications: Frequency range: 54-88MHz 174-806MHz.
Impedance: 300ohm (in), 75ohm (out). Gain: 13dB. Power
required: 120VAC.
Order # Mfr. # (ea.)
33-8945 3039 $39.99
Spartan 3 Mast
Mounted Preamplifiers
The industry standard 0064 DSB features a single 300ohm
VHF/UHF input and a single 75ohm output. Variations are
available for applications requiring separate VHF and UHF
inputs; 75ohm inputs; VHF only models and models with
active UHF and passive VHF passbands. They have been
designed for optimized performance with a supply voltage of
+12~+22VDC from a satellite receiver. Features include:
Surface-mounted components for automated production and
consistent high performance. Easiest installation in the
industry. High gain and ultra low noise figure from the latest
generation transistors gives optimum sensitivity. Separate VHF and UHF amplification plus the use of ultra
linear transistors improve output capability for optimum signal handling. Full lighting and surge protection.
Order # Mfr. # Inputs Input Imp. VHF Gain UHF Gain Power Supply (ea.)
33-8900 0064DSB 1 (VHF/UHF) 300 16 23 Yes $89.29
33-8905 0264DSB 2 (VHF & UHF) 300 16 23 Yes 94.66
Outdoor
Mast Mounted
Amplifiers
These powerful UHF/VHF antenna signal amplifiers
are designed to overcome signal loss related to long
cable runs, splitters, and junctions. While an amplifier
will not create a signal, it will increase its power and
minimize disruptions. Kit includes mast mount
amplifier, 110VAC power inserter, and 6' coaxial cable.
Frequency range: 40~862MHz.
Order # Mfr# Gain (ea.)
30-2090 PA-18 15db $39.95
30-2091 PA-17 17db 49.95
#30-2090
#30-2091
Broadband Structured
Wire RF Amplifiers
Compatible
with the market
leader of structured
wiring panels, these
5~1000MHz, DOCSIS
®
compliant amplifier modules are the ideal drop-in
replacement for CATV in-home signal distribution.
Improve your multimedia application with the
latest broadband technology for HDTV QAM signals.
Features include a durable, salt-spray-resistant
housing, weather-sealed “F” ports, and exceptional
surge performance.
Order # Description Gain (ea.)
33-10225 6 output +6.5dB gain $79.95
33-10226 8 output +10.0dB gain 89.95
TITAN 2TM
Mast Mounted Preamplifiers
The Titan range of mast mounted amplifiers has
been completely reengineered and updated. These
amplifiers represent the ultimate in preamplifier
performance. They are designed for use as an ultra
low noise, ultra high gain preamplifier for deepest
fringe applications and MATV headend applications.
Their very high signal handling also makes them
suitable for use as a mast mounted, ultra low noise
distribution amplifier for use in small MATV
systems. All models feature 75ohm, input and
output connections in line with modern headend
engineering practice. Models 7777 and 7778
cover both VHF and UHF bands with separate
amplification in each band for maximum signal
handling. They may be configured for either separate
or combined VHF and UHF inputs. They include a
switchable FM trap.
VHF UHF
Order # Mfr. # Input Gain Gain (ea.)
33-8950 7775 UHF N/A 26dB $94.49
33-8960 7777 UHF/VHF 23dB 26dB 100.39
33-8965 7778 UHF/VHF 16dB 23dB 99.95
C52_pg_274 8/13/07 10:04 AM Page 274