Installation manual

Setting the SVS-88 ID Code (switches 4-7)
The SVS-88 has an ID code which allows up to 16 (0 through 15) units to operate together.
The SVS-88 ID code is set by the same bank of switches as the baud rate. The following shows
Once changes have been made, replace the cover and assure that all
8 screws are securely in place.
ATTACH THE POWER CORD AND RE-APPLY POWER ONLY AFTER
VERIFYING THAT THE COVER IS PROPERLY IN PLACE WITH ALL OF
THE ASSOCIATED HARDWARE.
the switch setting for these codes. Factory default is Unit No. 0.
Unit No. 0 Unit No. 1 Unit No. 2 Unit No. 3
Unit No. 6 Unit No. 7 Unit No. 8 Unit No. 9
Unit No. 4
Unit No. 10
Unit No. 5
Unit No. 11
Unit No. 12 Unit No. 13 Unit No. 14 Unit No. 15
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
11