Installation manual

xx = unit ID number (00 – 15, default = 00)
oo = output number (01 – 08)
Example: MX00AF01 - Turn off audio on output 1 (this routes input 0 to
output 1)
The response from the SVS-88 will be:
MX00-Audio=00 to 01
MXxxAMoo - Mute/unmute audio toggle for output.
xx = unit ID number (00 – 15, default = 00)
oo = output number (01 – 08)
Example: MX00AM01 - Turn off audio on output 1 (this sets volume level of
input 1 to -64 dB assuming it was not already muted.)
The response from the SVS-88 will be:
MX00-Output 01 is Muted
Example: MX00AM01 - Return output 1 audio to its previous setting (in this
example -0 dB, assuming it was not already
unmuted.)
The response from the SVS-88 will be:
MX00-Volume 01 to 32
MXxxAPiibb - Adjust audio input audio sensitivity in 0.5 dB steps.
xx = unit ID number (00 – 15, default = 00)
ii = input number (00 – 08, 00 = off)
bb = volume level (00 = low volume -16 dB, 32 = pass through 0 dB, 48 = high
volume +8 dB)
Example: MX00AP0331 - This will adjust the input audio sensitivity to -0.5 dB
on output number 03.
The response from the SVS-88 will be:
MX00-Sensitivity 03 set to 31
MXxxAPAbb - Adjust all audio inputs sensitivity in 0.5 dB steps.
xx = unit ID number (00 – 15, default = 00)
bb = volume level (00 = low volume -16 dB, 32 = pass through 0 dB, 48 = high
volume +8 dB)
Example: MX00APA31 - This will adjust the input audio sensitivity to -0.5 dB
on all outputs.
16