Installation manual

Digital Commands
MXxxDiioo - Route a digital input to an output.
xx = unit ID number (00 – 15, default = 00)
ii = input number (00 – 08, 00 = off)
oo = output number (01 – 08)
Example: MX00D0103 - Route digital input 1 to digital output 3.
The response from the SVS-88 will be:
MX00-Digital=01 to 03
MXxxDiio#,o#,o#… - Route a digital input to multiple outputs.
xx = unit ID number (00 – 15, default = 00)
ii = input number (00 – 08, 00 = off)
o# = output number (01 – 08, maximum of 8)
Example: MX00D0103,05,08 - This will send digital input 1 to outputs 3, 5
and 8.
The response from the SVS-88 will be:
MX00-Digital=01 to 03
MX00-Digital=01 to 05
MX00-Digital=01 to 08
MXxxDAii - Route a Digital input to all outputs.
xx = unit ID number (00 – 15, default = 00)
ii = input number (00 – 08, 00 = off)
Example: MX00DA03 - Route digital input 3 to all outputs.
The response from the SVS-88 will be:
MX00-Digital=03 to 08
MX00-Digital=03 to 07
MX00-Digital=03 to 06
MX00-Digital=03 to 05
MX00-Digital=03 to 04
MX00-Digital=03 to 03
MX00-Digital=03 to 02
MX00-Digital=03 to 01
MXxxDFoo - Turn off a digital output.
xx = unit ID number (00 – 15, default = 00)
22