Installation manual

Status Commands
MXxxS - Return the settings of the SVS-88. This command requests the SVS-88
to return the output status of the audio and video outputs, as well as the
volume and sensitivity.
xx = unit ID number (00 – 15, default = 00)
Example: MX00S - This will request the current settings of the SVS-88 (digital
routes will be included if not attached to audio or video.)
The response from the SVS-88 will be:
MX00-Video=08 to 08
MX00-Video=07 to 07
MX00-Video=06 to 06
MX00-Video=05 to 05
MX00-Video=04 to 04
MX00-Video=03 to 03
MX00-Video=02 to 02
MX00-Video=01 to 01
MX00-Audio=08 to 08
MX00-Audio=07 to 07
MX00-Audio=06 to 06
MX00-Audio=05 to 05
MX00-Audio=04 to 04
MX00-Audio=03 to 03
MX00-Audio=02 to 02
MX00-Audio=01 to 01
MX00-Volume 08 to 32
MX00-Volume 07 to 32
MX00-Volume 06 to 32
MX00-Volume 05 to 32
MX00-Volume 04 to 32
MX00-Volume 03 to 32
MX00-Volume 02 to 32
MX00-Volume 01 to 32
MX00-Sensitivity 08 set to 32
MX00-Sensitivity 07 set to 32
MX00-Sensitivity 06 set to 32
MX00-Sensitivity 05 set to 32
MX00-Sensitivity 04 set to 32
MX00-Sensitivity 03 set to 32
MX00-Sensitivity 02 set to 32
MX00-Sensitivity 01 set to 32
MX00-Balance 08 set to 49
MX00-Balance 07 set to 49
MX00-Balance 06 set to 49
MX00-Balance 05 set to 49
MX00-Balance 04 set to 49
MX00-Balance 03 set to 49
MX00-Balance 02 set to 49
MX00-Balance 01 set to 49
26