Installation manual

Be careful when unpacking the SVS-88. This electronic unit is susceptible to damage

from dropping or placing heavy objects on top of it. Save the original package and all

enclosed packing material in case the unit needs to be returned. Damage due to shipping

in cartons other than the original package is not covered under the warranty.

Any modifications or improper use of the SVS-88 will void the warranty. Please read

all information and instructions concerning this system before installing.

Please call Linear with questions or concerns about the SVS-88. We are happy to assist

you with any problems you may be experiencing. If you are unsure of any aspect of your

installation, please contact one of our technicians at Linear.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS :

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

ANY CHANGE OR MODIFICATION TO THIS DEVICE WITHOUT THE PERMISSION OF

CHANNELPLUS MAY VOID THE USER'S AUTHORITY TO OPERATE THIS

EQUIPMENT .

DECLARATION OF CONFORMITY

Thank you for purchasing the SVS-88. The SVS-88 is a crosspoint switching

matrix. It allows 8 audio/video inputs to be switched to 8 unique audio/video out-

puts with virtually no switching loss. The matrix is controlled via a pushbutton front

panel, easy to use IR, or RS-232 interface. The unit provides broadcast quality

switching of S-Video, analog stereo/audio and coaxial digital audio signals (or

composite video). The SVS-88 provides maximum flexibility for both home and

commercial applications allowing fewer peripheral components to provide

consistently high quality audio/video throughout the installation.

This operation manual is divided into sections based on the complexity of your

application. For most installations, Basic Operation will be sufficient. This

section describes how to use the front panel as well as programming a learning

infrared remote with a few useful IR commands. Advanced Operation will detail

how to access the large array of commands using the RS-232 port and a control

device such as a PC, AMX or Crestron controller. Also, the Advanced Operation

section will detail the use of additional IR commands for more complex routing

functions.