Installation manual

MX00-Volume 06 to 32
MX00-Volume 05 to 32
MX00-Volume 04 to 32
MX00-Volume 03 to 32
MX00-Volume 02 to 32
MX00-Volume 01 to 32
MX00-Sensitivity 08 set to 32
MX00-Sensitivity 07 set to 32
MX00-Sensitivity 06 set to 32
MX00-Sensitivity 05 set to 32
MX00-Sensitivity 04 set to 32
MX00-Sensitivity 03 set to 32
MX00-Sensitivity 02 set to 32
MX00-Sensitivity 01 set to 32
MX00-Balance 08 set to 49
MX00-Balance 07 set to 49
MX00-Balance 06 set to 49
MX00-Balance 05 set to 49
MX00-Balance 04 set to 49
MX00-Balance 03 set to 49
MX00-Balance 02 set to 49
MX00-Balance 01 set to 49
MX00-Hardware revision = 02.00
MX00-Software revision = 01.00
MX00-Welcome from Channel Plus
MXxxZ99 - Verify presence of SVS-88.
xx = unit ID number (00 – 15, default = 00)
Example: MX00Z99 - Verify the presence of the SVS-88.
The response from the SVS-88 will be:
MX00-SVS88 OK
MXxxR95 - Reset SVS-88 to factory defaults.
xx = unit ID number (00 – 15, default = 00)
Example: MX00R95 - Reset SVS-88 to factory defaults.
The response from the SVS-88 will be:
MX00-EEPROM has been reset
MX00-Model No. = SVS-88
MX00-Serial No. = 0A000004
MX00-Video=08 to 08
MX00-Video=07 to 07
MX00-Video=06 to 06
MX00-Video=05 to 05
MX00-Video=04 to 04
MX00-Video=03 to 03
MX00-Video=02 to 02
MX00-Video=01 to 01
MX00-Audio=08 to 08
MX00-Audio=07 to 07
40