Installation manual

Preset Commands

Example:

Teaching Preset 3 Select

Press - 4 2 for preset number 3 (tE - 42 is displayed).

Press - 0 0 for required data entry as no input is necessary (42 - 00 is

displayed).

Press - 0 0 for required data entry as no input is necessary (42 - 00 is

displayed).

Place the learning remote's IR receiver in front of the IR teaching window and

select the new associated “Preset 3 Select” button on the IR learning remote.

Keep in mind, prior to executing a preset, you must first save a configuration to that

preset number.

Press - ENTER (the command for “Preset 3 Select” has been broadcast to

the learning IR remote).

40 = Preset 1

41 = Preset 2

42 = Preset 3

43 = Preset 4

44 = Preset 5

45 = Preset 6

46 = Preset 7

47 = Preset 8

48 = Preset 9

49 = Preset 10

50 = Preset 11

51 = Preset 12

52 = Preset 13

53 = Preset 14

54 = Preset 15

55 = Preset 16

Routing All Commands

Example:

Teaching Route Audio Only from Input 7 to all Outputs

Press - 6 2 for audio only routing (tE - 62 is displayed).

Press - 0 7 for input 7, 00 would turn all audio only outputs off (62 - 07 is

displayed).

Press - 0 0 for required data entry as no input is necessary (62 - 00 is

displayed).

Place the learning remote's IR receiver in front of the IR teaching window and

select the new associated “Route Audio Only Input 7 to all Outputs” button on the

IR learning remote.