Installation manual

Press - ENTER (the command for “Route Audio Only Input 7 to all Outputs”
has been broadcast to the learning IR remote).
61 = audio & video
62 = audio only
63 = video only
64 = digital only
NOTE: If no command is selected within a few minutes, the SVS-88 will
automatically exit the Infrared Teach Mode and return to displaying an Output with
its associated Input. Once you have completed the process of teaching your IR
learning remote the desired IR commands, you can exit the IR teaching mode on
the SVS-88. To do this press “FUNC” (Function), “FC” will appear on the display.
Next, input the number “46” followed by “Enter”. The display will return to
displaying an Output with its associated Input.
Example:
Press - FUNC 4 6 ENTER
46