Specifications

104
6.12 Setup
Once you have entered the data for each subsystem, move on to the last link on the Administrator
screen which is labeled Setup. Though there are several settings under this category, you’ll just need
to create a Username and Password to get started. The purpose of this setting is to give the home
owner their own username and password for remotely accessing the EyeOn User webpage. This
username will only allow the end-user to get to the User webpage, but will not give them access to the
Administrator screen. (For the installer’s convenience, the administrator’s password will give the
installer access to both the User and Administrator screens.)
Near the bottom of the Setup page, there are several buttons related to updating and rebooting the
server and touch screens. Since you have added or changed devices in the Profile screen, you must
click the Update Server button for the hardware to be recognized. After you have performed this
update, you will need to hit the Detect Hardware link, under the event log. Since this is the first time