Specifications

107
The hardware log will give you a list of errors that occur during the Hardware Detection process. You
will need to check this every time you detect hardware to make sure the detection was successful.
Proactive Hardware Monitoring Log checks your hardware every hour to see if it is still responding.
The Hardware Found is a list of the hardware in your system that was successfully detected.
Generate Cisco Code
This will automatically generate the Cisco config for you. Look at page 109 for more information
EyeOn Services
This link provides unique Customer and System information. Customer information should be kept up
to date by dealer. Below the Customer Information is the System Information. Here you will find the
unique key codes for the devices and software in each system. This information may be needed for
activation purposes.
Update Server
After you have made any changes to any of these screens, you will need to hit update server. This will
resave the config files. You might need to restart the touch screens. Click the Screen Reboot button to
do this. You must hit the Soft Server Reboot to reload the config file. The server will be down for about
half a minute.
Screen On/Off
This will allow you to turn off the screens to work on them. This will turn off all screens in the house.
Screen Force Update
This is will update the screens in the house by downloading and updating software and then running
it.
Change IP
This changes the IP address for the server.