Specifications

126
9.2 EyeOn Remote Programming
Codes can be found in the next section, Remote Codes.
1. Code setup
1-1) Manual code setup
• Press and hold [Device] + [Mute] buttons until LED illuminates.
• Press 3 digits code numbers for specific device (please refer to code setup
manual).
• Press [Enter] button to lock the code into memory. The LED will blink 3
times.
Example: To Select TV code 066.
• Press and hold [TV] + [Mute] buttons until LED illuminates.
• Press [0],[6],[6] .
• Press [Enter]
1-2) Manual Aux code setup
• Press and hold [Device] + [Mute] buttons until LED illuminates.
• Press 3 digits code numbers for specific device (please refer to code setup
manual).
• Press [AUX1, AUX2 or AUX3] button to code lock code into memory. The
LED will blink 3 times.
Example: To select TV code 066 to AUX1.
• Press and hold [TV] + [Mute] buttons until LED illuminates.
• Press [0], [6], [6].
• Press [AUX1, AUX2 or AUX3].
2) Auto code setup
* This method will find the brand automatically without the use of a library code number.
• Turn on the device (TV, VCR,…) that you want to control.
• Press and hold [Device] + [Mute] buttons until LED illuminates.
• Press and hold [CH+] button until device is turns off.
• As soon as device turns off, release the [CH+] button
• Press [Enter] button to lock the code into memory. The LED will blink 3 times.
The [CH+] button will transmit codes one at a time. If the device turns off but code is not selected
properly, press [Ch-] button one to two times to step back to previous code.
* If you want to select an AUX device Press [AUX1, AUX2 or AUX3] instead of [Enter] button in the
last step.