Specifications

control that source. If you have no keypads then you can skip this step. (More information for setting

up IR devices is located in the Integra DPC-8.5 section on page 30.)

Use the Source section to set up your sources. If you are using the EyeOn system as an intercom,

doorbell, or for audio feedback Source 6 should be set to Intercom System. The Model and Type are

just generic.

If you are using a CD or DVD device, you can add this to the system by selecting the make and

model. For example, if you had an Integra DPC 8.5 you would use the following: Make sure if you are

using the Integra that you use the IR code that is already created for you on the CD.