Specifications

24
(Notice the gain, some devices put out less output than others. You can use this to have Nuvo
broadcast the source at a louder volume.)
If you are using the server intercom system, please set source 6's gain to +12.50.
If you are using a FM/AM/WX tuner, we recommend using +1.25.
If you are using a XM tuner, we recommend using +4.00.
If you are using the DPC 8.5, we recommend using +1.25.
If you want to utilize Macros, please see the Nuvo Concerto Owner's manual.
Please set up the Zones that are used throughout the house. Each zone should be the name of the
room the speakers are placed in.
When setting up each Zone, enter the name of the room the speakers are placed in. Please make
sure that Volume Reset at Zone On, Loudness compensation On, and Open source control are all
checked to on. If these options are not selected it is possible that the Audio System will not function
correctly. If you are using IR distribution though out the house and want to make each keypad an IR
receiver then uncheck the disable IR boxes. All sources should be enabled.
If you are using keypads the first time the Concerto is turned on, it will ask you what zone should be
assigned. Please match the zones you set on the keypads with the appropriate room. If you choose
the wrong zone number you can change this by holding the menu and up/down volume buttons at the
same time. It is best to set up the Zones before you turn on the keypads.