Specifications

25
Example 1: (pictured below) If you are using the Audio feedback or doorbell you must use Zone 16
for the System Master take over for the intercom. Make zone 16 only have access to source 6. Here
zones 1-6 are normal zones, zone seven is output to the input of a home receiver in another room and
a slave of zone six, which is a near by room. Zone 16 is the system master, 20 is a slave zone to
Outside (Zone 5). Two controllers are used, one inside and one out, both serving the same functions
(Zone 5 and 20).
After finishing the zone setup, you can now update the Nuvo Concerto system.
For advanced diagnostics you can view the Nuvo Concerto RS232 PDF document on your EyeOn
Technician CD to get a list of the RS232 protocols. This device connects at 9600 BPS 8-N-1.
If you are using the Audio feedback or doorbell you must use Zone 16 for the System Master to take
over for the intercom. Create zone 17 and only allow access to source 6.