Specifications

For the XM tuner, you should simply setup the presets for XM1.

At this time, it is good to save the configure file somewhere so you can work on it later as needed.

You will need to download the information into the tuner. If you have an error message while doing

this try power cycling the tuner. Also try just doing side A then side B one at a time.

After you have finished the installation, there is one more necessary step for the Concerto system to

communicate with the T2 tuner. You must run a Cat5 cable from the back of the T2 tuner to the EZ

Port Cat-5 Connector.

For advanced diagnostics, you can view Nuvo NV-T2DF RS232 PDF document on your EyeOn

Technician CD to get a list of the RS232 protocols for the NV-T2DF. This device connects at 9600 8-

N-1.