Specifications

35
The Serial Number is located on the bottom of the M1 board. The RP Access Code is very important.
If you lose the RP Access Code you can not make changes to the ELK programming. Make sure you
write down this information.
After you fill out all the customer information and connect the RS232 cable, choose the connection
icon and Direct Using COM1 (Which ever port you have it connected to)
After you are connected you will need to Upgrade the Firmware. (This is optional now, the firmware on
the ELK is probably up to date) Choose Send/Rcv --> Update/Verify Firmware. When the Firmware
screen appears simply hit Continue to upgrade the firmware on the system.