Specifications

36
This will take several minutes to upgrade. After the program is updated you will not be able to
reconnect for a few minuets because the EEPROM is upgrading internally.
Now that you have upgraded the system it's time to setup the remaining information associated with
the system.
Start by choosing the Users Tab. Here you will setup each user's code. Most houses will only have
one. You will have to contact the home owner to find out what code they'd like to use. You can setup a
temporary code and change it later from the ELK Keypad, we recommend 1234. Since we only use
Area 1, uncheck everything but Area 1.
From the user screen you will then move to the Area screen. You will only need to setup Area 1. The
EyeOn system only supports Stay and Stay Instant modes, so uncheck the night modes. Also
uncheck the Single keypress quick-arm checkbox.