Specifications

63
After logging in, you will be presented with a welcome screen and navigation options for the EyeOn
system. This is where you will set up each component of the system the customer will be using.
This will start your setup for the EyeOn Automation System you are about to configure. By following
this step by step process you should be able to install all the server software as well as set everything
up to a live system. All of the pre-wiring should have already been completed prior to this install as
well as terminated and hooked into the provided equipment.
Now that you’re at the Administration screen, start configuring the server by hitting the Profile link.
(You must begin with the Profile section in order to populate the subsequent sections (Audio, Video,
Security, etc.) with the correct entry forms for the particular subsystems you will be using).