Specifications

68
6.3 Audio
Use the audio tab to specify audio sources with their respective remotes. Also enable keypads with
their respective zones and set announcement volume levels. (Different Audio system page will look a
little bit different. For example on the Russound page you will not see keypads)
Identify each audio source with a descriptive name. Be sure to select if the source is enabled or
disabled and specify if the source has a remote or not. You must enable the source for it to work;
Sources are enabled by default, so you should disable the source if it is not in use.
If an announcement volume besides the default setting is desired, place a value from 1-78 in the
announcement volume box. One is the highest volume setting while 78 is the lowest setting. The
default volume can be adjusted on the setup tab. See page 103 for instructions.
If the source is Line level, select Yes from the drop down box. You will then be asked to provide mood
numbers for the Volume up, Volume Down and Mute commands. See page 78 for help finding mood
numbers.
Despite the number of zones, Zone 16 will be disabled because it is reserved for doorbells.