Specifications

81
Lock Options
There are 2 checkboxes that give you the option of locking the volume and power functions.
Selecting the first check box will lock the volume and mute button on all of the sources. This means
that no matter which remote you are using the volume will be adjusted on the TV or surround sound
rather than adjusting volume on different sources such as a cable box or satellite.
The power lock uses the same concept. When you select power off on one remote it will turn the
power off for the TV or Projector.
Moods for Advance Video Setup
From the setup screen on the web based software select the moods button. At the bottom of the
screen select “add mood”. Create a mood name and then select which room it is going to be used
in. The Mood Option should be “Room Specific” in some cases. Room specific moods cannot be
run in conjunction with another room specific mood. If you try to run two moods that are room
specific at the same time, the first mood will be cancelled and the second mood will run. Keep this in
mind when you are setting up your mood options.
Select the Resettable as “YES” if you would like the mood to cancel it’s self. One example where
this would be recommended is when setting up a Power On Mood. This is helpful if the device did
not response the first time for some reason. If you did not have Resettable set to “YES”, you would
have to wait until the entire mood ran before you could run it again.