Specifications

86
Touch Screen
This is used to power cycle the touch screens. Select this option for each Touch Screen output.
Announcement
This is used for the Russound audio paging option.
Shade Type 1 (5 sec)
This is used for shades that require different outputs for up and down. You must hook this up by
hooking up the up relay to the first output and the down relay to the output directly under the up
output. This option closes the relay for 5 seconds and then opens it up. Use trial and error to
determine which Shade Type is the best option. Shades require 2 relays: one for the UP command
and one for the DOWN command. The commands must be setup back to back with the UP command
first. Shades will show up on the devices screen.
Shade Type 1 (1sec)
This is used for shades that require different outputs for up and down. You must hook this up by
hooking up the up relay to the first output and the down relay to the output directly under the up
output. This option closes the relay for 1 second and then opens it up. Use trial and error to determine
which Shade Type is the best option. . Shades require 2 relays: one for the UP command and one for
the DOWN command. The commands must be setup back to back with the UP command first.
Shades will show up on the devices screen.
Door Release
This is used for closing doors that are being held open. When the relay is tripped it releases the door
from the open position, allowing it to close.
Relay
This is used for different devices that can be triggered by relays. An example would be a strobe.