Specifications

89
6.7 Surveillance (PC DVR)
1. Put in the private IP address of the DVR. This is so the EyeOn Server can talk to the DVR over
TCP/IP. The normal default IP is 192.168.130.53. Next put in the public domain name and port. An
example is uanme.eyeonautomation.com:8883. Make sure you put :8883. You will find the DVR
security code by logging in to the DVR server and go to c:\inetpub\wwwroot and look for the directory
for the pass code. Should be something like EhitiE9h. Pass codes can also be located in C:\Program
Files\Video Insight\Video Insight Support\. If it is not found in one of those places check the IIS setup.
2. Fill in the appropriate camera(s) name.
3. Enable each camera that is active. If it is a pan/tilt/zoom camera, select yes. Press next to save
changes.