DVR User Manual
-
MENU SETUP
< Result table of total frame rate >
Event Record
Record Type Image Size Normal Record
Event Channel Other Channel
Unit
Single 360 x 240 Normal Frame ES_Frame RS_Frame CIF/1 SEC
720 x 240 Normal Frame ES_Frame RS_Frame CIF/1 SEC
720 x 480 Normal Frame ES_Frame RS_Frame CIF/1 SEC
Complex 360 x 240 Normal Frame EC_Frame EC_Frame CIF/1 SEC
720 x 240 Normal Frame EC_Frame EC_Frame CIF/1 SEC
720 x 480 Normal Frame EC_Frame EC_Frame CIF/1 SEC
- ES_Frame : Event single frame rate.
- EC_Frame : Event complex frame rate.
- RS_Frame : Remain single frame rate = ( Max. Frame Rate – ES_Frame) / 15.
⑤ Select the desired RECORDING INTERVAL using the (-), (+) buttons or wheel scroll of mouse.
RECORDING INTERVAL means at what-second intervals you want to record.
If you set “RECORDING INTERVAL” to “1SEC”, each channel will be recorded by setting frame
rate per “1SEC”.
⑥ Set the IMAGE SIZE of each channel using the (-), (+) buttons or wheel scroll of mouse. There
are the 3 types of 720x480(D
1
), 720x240(Half-D
1
) and 360x240(CIF).
* The default is 720x240.
wheel scroll of mouse.
⑧
There are 3
⑨ Set the PRE
event is dete cted period.
⑩
¨ buttons if yo eans
that the event
⑦ You can set the frame rate of each channel using the (-), (+) buttons or
- N : Frame rate for normal recording
E : Frame rate for event recording -
Set the IMAGE QUALITY for normal recording and for event recording of each channel using the
(-), (+) buttons or wheel scroll of mouse.
types, Fine(F)/ Superfine(S)/ Low(L).
TIME and POST TIME using the (-), (+) buttons or wheel scroll of mouse. When the
cted, the DVR will store pre- and post-recorded data during the sele
Choose the type of the EVENT using the (-), (+) buttons or wheel scroll of mouse and © , ª , § ,
u want the event recording(Motion detection/ Video loss/ Alarm) or not. “O” m
T value o seconds.
T
N
he
he
f “PRE TIME” is from 0 to5 seconds and the value of “POST TIME” is from 0 to 60
default of pre-recording time is 5 seconds and post-recording is 10 seconds.
ote: The pre- and post- recording is not valid in normal recording mode.
recording is “ON” and “-“ means that the event recording is “OFF”.
49