MSDS

Page 5
MATERIAL SAFETY DATA SHEET
Revision Date: 3/08/2007
Product name STODDARD SOLVENT for Level Vials / 116-S07350

Exposure Controls
Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below TLV(s).
Eye Protection
Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations
also permit other type safety glasses. Consult your safety representative.
Skin and Body Protection
Wear resistant gloves (consult your safety equipment supplier). To prevent repeated or prolonged skin
contact, wear impervious clothing and boots.
Respiratory Protection
If workplace exposure limit(s) of product or any component is exceeded (see exposure guidelines), a
NIOSH-approved air supplied respirator is advised in absence of proper environmental control. OSHA regulations
also permit other NIOSH respirators (negative pressure type) under specified conditions (see your industrial
hygienist). Engineering or administrative controls should be implemented to reduce exposure.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state
liquid
Form
No data
Colour
colourless, clear
Odour
hydrocarbon-like
Boiling point/range
315.00 °F / 157.22 °C
pH
No data
Flash point
104.99 °F / 40.55 °C Tag closed cup
Evaporation rate
0.11 N-Butyl Acetate
Explosion limits
1.0 %(V) 6.0 %(V)
Vapour pressure
2 mmHg @ 68.00 °F / 20.00 °C
Vapour density
4.9
Density
0.7720 g/cm3 @ 60.00 °F / 15.56 °C
6.44 lb/gal @ 60.00 °F / 15.56 °C
Solubility
No data
Partition coefficient(n-octanol/water)
No data
Autoignition temperature
500.0 °F / 260.0 °C
10. STABILITY AND REACTIVITY
Stability
Stable.
Conditions to Avoid
Avoid contact with: