- G- and K-Series External RAID Board Controller User's Guide

G- and K-Series User’s Guide
7-8
The Controller LUN screen displays.
5
Select the option or number you want to use.
The system confirms that you want to make the change.
6
Select Yes and press Enter to make the changes.
Keep the same Loop ID for the
channel at all times
! Select the [Loop ID] you want to
use and press Enter.
This can be any number from 0 to
125.
To Do this
Not assign the controller a LUN
! Select NONE and press Enter.
Let the controller determine the
channel LUN each time it powers up
! Select SOFT and press Enter.
This is the default setting.
Keep the same LUN for the
controller at all times
! Select the [LUN] you want to use
and press Enter.
This can be any number from 0 to
7.
To Do this