User Manual

WARNING
WARNING: Handling the brass parts of this product will expose you to lead, a chemical
known to the State of California to cause birth defects and other reproductive harm.
Wash hands after handling.
CAUTION
1E
WARNING: Improper use or failure to follow instructions can result in explosive
failure causing serious eye or other injury. For safe use of this product you must read
and follow all instructions. Do not leave a pressurized sprayer in the hot sun. Heat can cause
pressure build-up resulting in possible explosion. Do not store or leave solution in tank after
use. Always wear goggles, gloves, long sleeve shirt, long pants and full foot protection when
spraying. Do not attempt to modify this sprayer. Replace parts only with manufacturer’s
original parts. Never spray ammable, caustic, acidic, chlorine, bleach or other
corrosive solutions or heat, pressure, or gas producing chemicals. Always read
and follow chemical manufacturer’s instructions before use with this sprayer as
some chemicals may be hazardous when used with this sprayer.
• PRE-USE CHECK: Before each use check tightness of hose nut to be sure hose is
securely attached to the shut-off assembly. Insure that all nozzle and wand
connections are tight.
• Do Not exceed a tank solution temperature of 120º F/ 49º C.
NOTE: The tank and hose may have residual water in it due to quality testing
performed on the sprayer.
WARNING
This sprayer is designed to operate with a Black & Decker 20V Lithium Ion battery ONLY.
Any other batteries could cause serious harm or injury to the operator and serious damage to
the sprayer.