Installation Guide

Chapin Sprayer Operator’s Manual - English
Align the hose reel with the vertical holes in the bracket
and insert the pivot bar through the bracket and reel.
Attach the short connecting hose from the hose reel body to the
cap. Once you turn on your tap, the water will flow through this
hose, through the hose reel to the spray nozzle. You can regulate the
water flow by twisting the end of the spray nozzle.
Operation
This hose reel system has been equipped with a click-lock mechanism. To operate, pull the hose out to the
desired length. When you stop pulling, the hose will automatically stop. To engage the automatic hose recoil,
give it a short sharp pull and you will feel the hose automatically retract. You can interrupt this process by
pulling the hose again. To retract the hose safely, please ensure you keep hold of the hose end while walking
towards the hose reel. Letting go of the hose, may result injury.
MAINTENANCE
1). Always keeps the Hose clean after use.
2). It is recommended to turn off water flow at your garden tap before retracting the hose.
3). When not in use for long period, it is advisable to store your hose in a covered area.
TECHNICAL SPECIFICATION
MODEL HOSE LENGTH HOSE
MATERIAL
PRESSURE INNER DIAMETER
OF HOSE
SIZE OF INNER
FITTING
5999 66 ft. / 20M PVC MAX 348 PSI 1/2’’ 3/4’’ BSP
Chapin International, Inc
P. O. Box 549 700 Ellicot St. • Batavia, NY 14021-0549 U.S.A. • 1-800-950-4458 • www.chapinmfg.com
Due to our ongoing product improvement process, product specifications may change without notice.