Instructions / Assembly

General Operating Instructions
• Be sure gate control is in the closed position before lling hopper
• Determine appropriate setting for material being used by reading the suggested setting on the
material’s bag AND/OR by referencing the application chart on your spreader’s control panel
(Charts provided are only guidelines. Be sure to read the instructions on the bag/box of the
material you’re spreading to identify accurate setting needed)
• Remove wing nut and slide indicator to desired setting. Tighten wing nut completely.
• To begin spreading, start walking (about 3mph pace) release the control lever by pushing it
forward. It will spring forward to the slide stop.
• To stop spreading simply pull the gate control back into the closed position.
Storage and Maintenance
• When nished spreading empty hopper of any remaining material
• oroughly wash spreader and allow to dry before storing
CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549
CHAPIN CUSTOMER SERVICE: 800-950-4458 www.chapinmfg.com
Due to our ongoing product improvement process, product specifications may change without notice. U.S. and foreign patents pending.
Ref.# Qty Part No. Description
1 1 6-9067 Auger
2 1 6-8280 Baffle Kit
Replacement Parts
1
2