Use and Care Manual

Step 1:
Attach the right Frame leg and the le Frame leg to the Frame
Body using (2) M6x55mm hex bolts and (2) M6 Nylon locknuts
per frame leg. Aer the frame legs have been attached, place the
two End caps onto the bottom of both frame legs. DO NOT
TIGHTEN DOWN COMPLETELY.
NOTE: Use bottom hole pattern on legs if equipped.
CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458
Step 2:
Slide bushings into the holes on
the hopper frame from outside
of the frame.
Step 3:
Insert Axle into Tire as shown and secure using (1)
M6 x 45mm Hex Bolt and (1) M6 Nylon Locknut.
Take note of hole locations on Axle, to ensure
correct orientation.
Hole at top