Product manual

7
• Install legs by placing 2 - 1/4-20x1/2” Hex Head Bolt through the smoker body and through each leg as shown. Thread a
1/4-20 Keps nuts onto each bolt and tighten by hand. Using an adjustable wrench and 7/16” Combination wrench (Not
Provided), tighten each nut and bolt securely.
• Install the leg with the rating label on the back side of the smoker body, as shown.
Install bolts from inside
the smoker body
8
Qty: 8
#1/4-20 Keps Nut
Qty: 8
#1/4-20x1/2"
Hex Head Bolt
• With the assistance of a helper - stand the unit upright on its legs.
CAUTION: THIS UNIT IS HEAVY!
Stand the unit upright on its legs
CAUTION: This unit is HEAVY!
Do not attempt this step
without assistance!
16 • 07701413
Leg with Rating Label