Product guide

11
12
13
Attach damper wheel onto the firebox door using one M6 x 12mm Phillips head bolt and M6 locking nut. Do not over-
tighten the damper wheel, the damper wheel should move freely.
Next - Attach door latch using one M6 x 11mm Phillips head shoulder bolt and M6 hex nut as illustrated.
Install one M6x15 shoulder screw into end of firebox as shown
Finally, slip the firebox door into position by inserting the hinge rods into the bushings as shown.
Connect firebox lid and firebox base using six M6 x 12mm Phillips head bolts.