Owner`s manual

6 • 463232103
ÔÚ
ÔÎ
ÎÎ
ÎÚ
Assembly  463232103
• Unpack and remove all protective packaging.
1. PositionbottomshelfwiththeTankholepatterntothelef t
side.See Fig. 1.
VERY IMPORTANT: Thelabelsonthecartlegs
indicatetheirassemblypositiontothebottomshelf.
LF LF
LF LF
LF=Left
Front,
LR LR
LR LR
LR=Left Rear,
RF RF
RF RF
RF=Right Front, and
RR RR
RR RR
RR=Right
Rear.Labelsshouldfaceinwardtowardeachotherwhen
correctlyassembled. Remaining components cannot be
assembled if leg positions are incorrect.
2. Installthefourcartlegstotheindicatedcornersofthe
bottomshelfusing8ofthe 1/4x21/2"Phillipsheadscrews
provided.Donotfullytightenscrews.
3. Installcrossbraces,facinginward,tocartlegsonboth
sidesusing8ofthe 1/4x1/2"Phillipsheadscrews.Fully
tighten.See Fig. 1.
FIGURE 1
Cross
Brace
Bottom
Shelf
4. Screwthe4cas tersintothecasterseatsinthebottomof
eachcartleg.Turnthethreadedcasterstembyhand,
clockwiseunti litstops.Fullytightenwitht hewrench
provided.See Fig. 2.
5. Installthetwosidepanelsandonerearpaneltothecartby
using4ofthe 3/16x1/2"Phillipsheadscrewsoneach
panel.Leaverearpanelscrewsloose.See Fig. 2.
FIGURE 2
Caster
Rear
panel
Side
panel
Side
panel
6. Attachthedoorbrackettothe lower holesinthefrontlegs
withtheendtabspointingupwardandtheflangetotherear,
pointingdownward.Use2ofthe 1/4x1/2"Phillipshead
screws.Donotfullytighten.See Fig. 3.
7. Placedoorsintothehingeholesofthebottomshelfand
doorbracket.Pushdoorbracketdownuntildoorsare
secureandcanopenandclosefreely.Donotfullytighten
doorbracketscrews.See Fig. 3.