Owner`s manual

463232103 • 7
8. Removeprotectivefilmfromdoors.Instal ldoorhandlesto
doorsusing4ofthe 3/16x3/8" Phill ipsheadscrews.See
Fig. 3.
9. Attachthe4sideshelfbracketstothetopsofthecartlegs
using8ofthe 1/4x1/2"Phillipsheadscrews.
Besuretheflatsideofeachbracketfacesoutward.
Fullytighten.See Fig.3.
10 . Placethesideshelfovertheleftbracketsandcross
brace.Besuretheinsideshelfholesalignwithcross
braceholes.Secureshelffirmlytotheendsofthe
bracketsusing2ofthe 1/4x1/2" Phillipsheadscrews.
Repeat this procedure forthesideshelfontherightside
ofthecart.See Fig. 3.
FIGURE 3
FIGURE 5
Shelf bracket,
flat side facing
outward
Toreducetheweightofthegrillhead,openthegrilllidand
removethepackedcomponents. This step requires 2 people
to lift and position the grill head onto the cart.
12 . HINT:Slidegrillheadintocartfromthefront. Use care to
avoid scratching tops of side shelves.Alignthe2holes
beneaththehangledgeoneachsideofthegrillheadwith
the 2holesinthesideshelf andcrossbraceonthecart.
Raisethegrilllidandinsert4ofthe 1/4x1/2"Phillipshead
screws.Beneaththe sideshelves,add 1/4" nuts.Donot
fullytighten.See Fig. 5.
13.Attachheatindicatortogrilllidusingnutprovided.Make
suregraphicsonheatindicatorareproperlyorientedbefore
tighteningnut.See Fig. 5.
Match
lighting
stick
FIGURE 4
11. Attachmatchli ghtingstick
andchaintotherightrear
leg,belowshelfbracket,
usingone 3/16"x1/2",
selftapping, Phillipshead
screw.See Fig. 4.
Sideburner
shelf
Side
shelf
Lower
hole
Do or
bracket
Do or
Handle
Hinge
Hinge
hole
Align
holes
Bracket with
cutout
Remove
film
Grill
head
Hang
ledge
Gas hose
Hang
ledges
rest on
shelves
Heat indicator