Assembly Instructions

ASSEMBLY

Position Heat Shield and Spacer as shown at right

below and place into Bottom.

Insert narrow end of Burner through large hole in

side of Bottom and rest burner bracket on Heat Shield.

Insert one 1/4-20x1/2” screw through Bottom,

Heat Shield and into burner bracket.

Burner

Heat Shield,

F/ Bottom

Bottom

1/4-20x1/2” Screw

Position Legs as shown at right.

Spread ends of Legs slightly and insert into upper

holes in the front and rear of Bottom.

Attach the 1/4-20 shoulder screw and 1/4-20

nut into lower holes in the front and rear of

Bottom.

1/4-20

Shoulder Screw

Qty. 4

1/4-20

Nut

Qty. 4

1/4-20x1/2”

Screw

Qty. 1

Spacer

Qty. 1

leg

1/4-20

Shoulder Screw

1/4-20 Nut