SandPRO™ 550 POOL FILTER SYSTEMS OWNER’S MANUAL MODELS 4528 IMPORTANT SAFETY RULES Read all instructions BEFORE assembling and using this product. KEEP THIS MANUAL. Sand not included. USE ONLY No. 20 Silica Sand with a particle size of 0.45 mm – 0.55 mm IMPORTANT DO NOT RETURN PRODUCT TO STORE For technical assistance and missing parts, call Customer Service toll-free 1.888.339.2546 (press 135 at any time) Monday through Friday, 8:00 am to 5:00 pm MST Please visit our website, www.game-group.
YOUR POOL FILTER SYSTEM HAS BEEN ENGINEERED AND MANUFACTURED TO OUR HIGHEST STANDARD FOR DEPENDABILITY, EASE OF OPERATION AND SAFETY. WITH PROPER CARE, IT WILL GIVE YOU YEARS OF DURABLE, TROUBLE-FREE PERFORMANCE. THANK YOU FOR YOUR PURCHASE. READ ALL INSTRUCTIONS BEFORE ASSEMBLING AND USING THIS PRODUCT. FAILURE TO FOLLOW INSTRUCTIONS CAN CAUSE SEVERE AND/OR FATAL INJURY. IMPORTANT DO NOT RETURN PRODUCT TO STORE For technical assistance and missing parts, call Customer Service toll-free 1.888.339.
TABLE OF CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Safety Warnings . . . . . . . . . . . . . General Information . . . . . . . . . . Technical Specifications . . . . . . . . Parts List/Reference . . . . . . . . . . Getting Started . . . . . . . . . . . . . Assembly Instructions . . . . . . . . . Connecting the Filter System . . . . . Valve Operations . . . . . . . . . . . . Filter Operations. . . . . . . . . . . . . Maintenance . . . . . . . . . . . . . . . Troubleshooting . . . . . . . . . . . .
1. SAFETY WARNINGS READ ALL WARNINGS BELOW. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY OR DEATH. • • • • • • • • • • • • • • • • • RISK OF SUCTION ENTRAPMENT HAZARD, WHICH, IF NOT AVOIDED CAN RESULT IN SERIOUS INJURY OR DEATH. Do not block pump suction at the pump or in the pool as this can cause severe injury or death. Electrical wiring MUST be installed by a trained professional and adhere to local code and regulations. Avoid electric shock. DO NOT USE power extension cords.
2. GENERAL INFORMATION This manual provides information relating to the installation, utilization and maintenance of the Pool Filter System. The pump included with the filtration system is a horizontal, self-priming centrifugal pump. For the pump to function correctly, the water temperature must not exceed 95°F/35°C. The filter included in the filtration system is equipped with a container drainage system, pressure gauge and built-in container components.
4. PARTS LIST/REFERENCE Before starting installation, check to make sure all parts are present in package.
5. GETTING STARTED Unpacking Your Filter System This product requires assembly. Carefully remove the product and all parts. Make sure all items listed in the Parts List/Reference are included. Please note that some parts may be pre-assembled. Inspect everything carefully to make sure nothing is damaged. Do not discard packing material until you have satisfactorily operated the product. If any parts are missing or damaged, please call the number listed on the front page of this manual.
6. ASSEMBLY INSTRUCTIONS Water Pump Assembly 1. Secure the water pump to the base plate with the provided pump mounting hardware. See Figure 1. 2. Screw the 1¼”-1½” hose connector into the center port of the water pump. Ensure that O-Ring A (2¼” dia) is installed between the port and the connector. 3. Remove the threaded ring (collar) on the outer opening of the pump. 4. Place O-Ring B (3" dia) in the groove around the hair and lint strainer basket. 5.
5. Securing the filter assembly. a. Install the main tank seal around the bottom of the 6 position multi-port valve. See Figure 6. Hose Connector NOTE: Apply a good amount of silicone grease or pool lube around the seal before installing it onto the valve. This will allow for an easier installation and provide a better seal. b. Install the valve onto the filter tank using the clamp ring and securing it with the included 5mm hex key.
7. CONNECTING THE FILTER SYSTEM The next section outlines installation instructions for connecting the Pool Filter System to your pool. Since the hoses utilized for filtration and return lines differ for various types of above-ground pools, the pool-filter connection section is broken down by pool hose size and type. For pools with 1¼” or 1½” diameter unthreaded hoses, see ”A” below. For pools with 2¼” threaded hose connectors, see ”B” on following page.
B. For Pools with 2¼” Diameter Threaded Hose Connectors These instructions assume that the pool is already assembled with hoses attached to the water intake and return ports on the pool. O-Ring C 1. Short INTEX® Adapter Installation a. Screw the short INTEX® adapter into the transparent hair & lint strainer cover on the water pump. b. Make certain that O-Ring C (1½" dia) is in place before securing. 2. Pool “Skimmer Hose” Attachment a.
8. VALVE OPERATIONS Make yourself familiar with your filter system’s valve settings and functions. Filter Valve Settings & Functions Setting Complete Water Flow/Function Filtration Function: Vacuum, regular pool filter action. This is the setting the filter will be set to most of the time. In this position, water is directed through the top of the filter where it compresses and flattens the sand.
9. FILTER OPERATIONS Start Up Once the filter system has been properly assembled, the sand chamber filled with sand and the hoses connected, you may begin with filtration. However, we recommend that you clean and prepare the new sand that is in the sand chamber first. Cleaning the sand prior to filtering your pool will remove most of the dust and tiny sand particles that may exist in the sand. If you move straight to filtering, these particles will end up in your pool. Cleaning the Sand 1.
10. MAINTENANCE The chart below outlines the recommended maintenance schedule for your Pool Filter System.
11. TROUBLESHOOTING Problem Cause Solution Pressure is too low Hair and lint strainer basket is dirty Clean the hair and lint strainer. Air in the pump Poor seal on the intake side of the pump Tighten hose clamps and connection fittings. Water flows into the drainpipe Dirt around the seal of the multi-port valve Unscrew the multi-port valve from tank cover and clean the seal. Leaking filter Faulty Seal Check the seal, replace if needed. Clamp not tight Tighten clamp.
SAVE THESE INSTRUCTIONS 16
12. LIMITED WARRANTY STATEMENT The manufacturer warranties safe operation and reliability only under the following conditions: The filter system is installed and operated according to the assembly and operating instructions. Only original replacement parts are used. Consumable parts do NOT fall under the warranty Expendable parts do NOT fall under the warranty.
13.
SAVE THESE INSTRUCTIONS
IMPORTANT DO NOT RETURN PRODUCT TO STORE For technical assistance and missing parts, call Customer Service toll-free 1.888.339.2546 (press 135 at any time) Monday through Friday, 8:00 am to 5:00 pm MST Please visit our website, www.game-group.com, for potential updates to these instructions. Look for other GAME products at your favorite store or visit our website, www.game-group.com. facebook.com/GAMEproducts Great American Merchandise & Events™ 16444 N. 91st Street Scottsdale, AZ 85260-1567 U.S.A.
